What Have You Done To Your 2nd Gen Tacoma Today?

Custom Splice Synthetic winch line!! http://www.customsplice.com/?target=main

 

Found this headache rack off a Ranger for $350. Does anybody know if it will fit a my truck and is it worth it?

 

https://www.youtube.com/watch?v=lZ3Ec1p93PA

 

Lmao ^^^^

 

Hilarious... btw... my boss gets a kick out of this exact kind of shit that I show him on these forums.

 

Wheres that mod at please.

 

2014 seatbelt and door beep disable by removing the beeper



Hood light kit

 

what size did you end up going with to get 34's?

 

Mocked up sand blaster paddles for glamis!

 

rear suspension setup?

 

Got to play with my lca cam bolts after taking it for an alignment and being told they were frozen . Got the driver side freed up, will do passenger the side later in the week and try to get it aligned on Friday. Oh well, at least I'm able to do it all myself.

 

How are you getting them loose? Mine are frozen too

 

Check out my build

 

Absolutely, my first application was when my truck was about a month old, so I was able to get a good base coat on every single nook and cranny underneath the truck. That year the only thing I didn't get was the leaf springs and the front control arms. I've since rectified that this year. I also did the door bottoms, tailgate bottoms and in front of the front doors/fender base. I really need to pull the fender liner and pull out all the leaves and junk in there though.

I used about 75% of the gallon on my frame, mine has a very light brown hue to it now. I would have used 100%, but my dumb self knocked over one of the containers as I was filling it, coating my garage slab with a nice sheen of Fluid Film.

It will go away. I sprayed in my garage and (as noted above) knocked over a can of it so I probably lost maybe 20% of a gallon on the floor. I also got a little on my Weathertech when I was spraying inside the front fender. It will probably linger for a week or so, but who knows what my garage will end up being like (groan).

It will.

Exactly.

 

I need that mod on mine. Is there a thread to remove the cluster and beeper? I also want to change my lighting in the dash, console, etc.

 

Beeper is easy.
Take the bolt behind the kick panel by your left foot out. The take out the little shelf by your right knee out. Then pull off the cover hiding the lower dash bolt by your right knee and remove the bolt. Pull the lower dash out a little. Pop the the push pins above the cluster and remove. Lower the steering wheel and pull the upper dash out enough to get to the cluster. There are four bolts in four corners. Take those out and disconnect the two wire harnesses. Pull out the cluster and there are 3 silver screws on the back. Remove them. Take pliers and turn twist the circular nosie maker. (I have no idea what it is called) reassemble and enjoy.
Pm me if I can help

 

That is excellent. Do you have any details on what your setup is (LED roll or individual, wire running, hood pin or manual switch, etc)?

I really should eventually invest in a set of hood struts. I have a set in the Subaru and they're brilliant.

 

Thanks
Single strip 5630 led srtip wired to aux fuse box with a hood pin my friend gave me...wires run in hood crevices and zip tied at hood hinge
Love it the 5630 are bright as hell
And yeah the hood struts should be in from the factory

 

Snow wheeling

 

Andre's emblem is so badass. nice rig.