What Have You Done To Your 2nd Gen Tacoma Today?

Any pics of the truck after install?

 

That reminds me, I need to keep an eye out for folks putting old Christmas trees out this year, hate to let such burnable wood go to waste!

 

Sprayed the kick panels with truck bed spray liner after masking and scuff sanding...

 

I like the way that looks!

 

Snow tires back on. Missing my beadlocks already.

 

Uh, nothing to the Taco. I'm too busy trying to get a stuck CD out of my wifes Subaru Forester. Looks like I have to take half the $!#&^ car apart to get to it. It's one of those " i don't know how it happened honey" episodes.

 

Check the vacuum hose that goes from your air intake to the fuel pressure regulator make sure it's hook up same thing happened to me and it ended up being the hose had come off loose.

 

Where did you get those screws and grommets? Thx
Nice, I have to do that

 

You can get those at Lowes or Home Depot, the grommets are in the drawers and the carriage bolts should be in the drawers as well. Looks like he just painted the heads black.

 

Removed my front anti-sway bar. I was able to do it without removing my AllPro IFS skid plate. I just removed one tire and removed the front 4 bolts holding the skid plate on so I was able (with patient maneuvering) to slide it out where the skid plate connects up front. Time for a test drive!

 

installed my spidertrax. it is exactly the stance i wanted and enables me to keep the stock wheels which i think i prefer, for now at least. next on the list is tires and i will probably just install my 5100's at 1.75 and see how i like it before i order more parts.

before:



after:





should've had that offset from the factory IMO.

 

:Spy:

 

That's neat, but how you gonna access it with any speed after you pile junk on top of it?

 

That's the backup gun

 

If only I didn't work on a federal facility every day...

 

You're day will come someday when you can do it!

 

Hopefully not for a long time, no matter how hopeless my job can feel.

But I've always found that restriction rather astounding. I'm young enough that is been that way since I was old enough to comprehend.

 

Got it!! Great job.

 

I got them at Home Depot 3/8 X 1/2 plasti Dipped the head, had to drill the drain hole to make a 3/8 bolt fit.

 

Washed it and ordered wheels for it. TRD Baja beadlock style wheels. Can't wait.