AZ Classifieds

Hahahaha I bey you were waiting forever for that one

 

I have 4 Trd sport rims available good condition. $300. Also have 3 Bfg at's that have tread good enough to be spares. Make me an offer

 

what size are the BFGs? I'd be interested in one for a spare.

 

Suspension is sold pending funds.

Thermostat still up for grabs, price drop to $15.

 

265/70/17 c rated

 

have quite a few things going up for sale. message me if your interested. i will make an actual thread once i can get pictures.

Rear third member with 4.88 gears and a lock right lunchbox locker. ALMOST BRAND NEW. 1 TRIP ON THESE GEARS WITH A MASTER INSTALL KIT. i was out in glamis and blew the rear diff, had it fixed on wednesday morning with master install, and a new R&P, broke it in, and then broke my front diff on thursday, and didnt drive it anymore. this fits non e locker rear diffs. i can also install for you. we can work something out. i paid $580 just for ring and pinion, and master install kit, and i paid $120 for install into the third member, plus another $200 for the rear locker.
i would sell for $500 and i will install into your rear axle for $50. so this saves you about $350.

Front OLD SKOOL camburg long travel kit with ball joints. fits 95.5-2004 tacomas and 4 runners. 2wd or 4x4.
i have upper and lower control arms, 12 inch limit straps, gusseted stock spindles with manual locking hubs, custom extended CV axles to retain 4x4, and extended brake lines.
for everything to retain 4x4 with long travel, $2000.
i also have 2 spare custom CV axles to retain 4wd with manual locking hubs id sell for $300. these have the high angle CV boots as well.

10 inch king coil overs with dual rate springs. i believe its a 6 inch top #500 coil with a 16 inch lower #600 coil. external resovour, revalved by yours truely with all new seals and oil 4 trips ago. $1000

glassworks 7inch flare bed sides. these have holes in them, scratches, spider cracks in the gel coat. they are currently being ran but would need some loving to look good. they are currently custom painted so you would also need to repaint them or it would look weird as well. brand new these are $500 plus about $200 in shipping.
id sell them for $200 i also know people that can repair everything and paing for cheap.

i also have 6 wheels and tires. 5 tires are 33x12.5x15 BFG KM2s. 2 of them have 90% tread left and are on pro comp black steelies, 8 inches wide, these also have the warranties from discount tire for life and i paid $700 alone for these 2 tires and wheels. 2 have 50% tread left and are on american racing teflon coated atx wheels 15x8s and these are discontinued and i know everyone has been looking for them for spares for a long time. 1 is basically only good for a spare on a stock 15 inch wheel. id say about 10% tread with sunrot.
for the whole lot $1000 i know the wheels are different so i am willing to split up. just message me about splitting if interested.


i know i have more so ill post up as i think of it. Thanks.

 

i have 4 hubs and spindles. i bought 2 for spares a while ago.
so yeah i would sell some.

the current driver side spindle is making a noise from the bearing im pretty sure. the bearing will probably need replaced..

i also have the lower ball joints welded onto the spindles (as well as bolted on) ive just broke the bolts before so i welded them on too to make them extra beefy. (only on the ones on my truck right now)


id get rid of them for a pretty good deal since i know they arent perfect. i live in east mesa and you can take a look at what i got at any time.

 

they are all with manual hubs, without ABS, also check out my edit above i added quite a bit.

 

nope im pretty positive only 1 of them needs a new bearing.

but im pretty sure on the other driver side that doesnt need a bearing i messed up some of the threads that bolt the lower ball joint on. i chased the threads with a tap so the bolts thread in just fine, but i dont know how strong it is because the entire weight of the front end of the vehicle is held by those bolts. me personally id run it and just weld the balljoint to the spindle for the extra insurance. if you ever need to take it back apart you can just unbolt the balljoint from the lower arm so the welds wont effect you.

i just want to make sure i set the right expectation up front with what i got.

 

I am also very interested in a set of spindles and locking hubs. Pm me with a price.

thanks

Sam

 

pmed

sounds good thanks dude.

 

My buddy is selling his 84 solid axle truck. LOTS of good barely used parts.

http://phoenix.craigslist.org/wvl/cto/4789398186.html

 

Sectional Couch For Sale: $400 OBO

This sofa is incredibly comfortable and comes with additional decorative pillows which are not shown in the picture.

The only reason I am selling it is because I am moving to California and can't take it with me.

 

Does anyone have 1 oem bilstein shock I could use until I get mine shipped in. Then you can have It back

 

Nope. I have seen how you treat shocks

 

I would, but I threw mine away when I upgraded. Didn't think someone was going to do what you did.

 

Please!!! my truck is leaning to the left and rides like poo.

 

I have a pair. 20 bucks and they are yours to do with as you please

 

10 for 1

 

Can you take measurements for me? Just need the length of both sides.