New Wheels

Hi - pretty new here but have done a ton of research and this forum is great resource. I have the toytec 3" lift (coils over stock Bilstein shocks but plan to replace with 5100's in the near future) in my possession with the 2" AAL - http://toyteclifts.3dcartstores.com/NEW-3-Lift-With-front-coils-rear-options_p_233.html

I am looking at 17x8 wheels with 4.5 BS and 0 offset although was considering the 17x9 4.5 BS -12mm offset (looking at Fuel Dune wheels or something similar like Cepek's) - just unsure of rubbing issues. Would like to run 285/70/17's but it seems like 275/70/17's are the safer bet for no rubbing issues. My build is purely aesthetic. I currently am running the plus-one size 265/70/17 on stock TRD sport alloys.

I would love to see pics of anyone who has done something similar and your experience. It seems some people have minor rubbing issues and some have none at all.

 

second this!

 

Nice choice here's my Dune wheels!

 

Nice! I almost went with those but went with the Fuel Krank wheels. Lift is being installed this evening. Just waiting on wheels to arrive - they have not shipped yet as the new batch had just arrived to LA last week. Will be adding 285/70/17 Nitto Terra Grappler G2's once they arrive.

 

-12 offset??? if so you'll also need to purchase special extended thread lugs...

http://www.tacomaworld.com/forum/wheels-tires/119883-wheel-studs-too-short-what-do.html

 

I did not have to do anything like that. Took off the old wheels and put on the new ones no problem. My research indicates a lot of misinformation and misunderstanding on this forum.

 

Finally got around to posting image

 

Fuel Anza 265/75/16 with 0 OS 4.5 BS no rubbing

 

I have 18x9" wheels with a 4.5 BS and -12mm offset as I was told these are the best numbers to get for our trucks. I like how my wheels stick out past the fenders about 1 inch....gives it more of a mean stance.