So I just ordered some lights from Ebay and installed them.

The headlights and marker/signal lights work great, but i have to wire the LED's and halos.

Do i wire them into my DTRLs?

http://www.ebay.com/itm/17134310762...iewitem=&sspagename=ADME:L:OC:US:3160&vxp=mtr

theres the lights i bought.

 

You can if you want!

 

Is that the proper way to do it? Theoretically they should come on with just my DTRLS and when i turn my headlights on. correct?

 

Nice looking lights just remember you get what you pay for. Post pics when your done.

 

Yessir! Or you can run it through switch but that's a little more work. Post pictures when you're done!

 

I will post some pics. So I just splice the ground wires from the led/halo into the white/black wire from DTRL and the positive wire to the green wire from dtrl?

 

Yeap! Here's what I did to my halos

 

Got kind of dark but here they are.
http://imgur.com/cTwz5eN

 

No pic.. But did you seal them up better with anything? Theyre probly gonna leak water through it or get condensation one, or both... Maybe not if you're lucky...

Edit, Nvm the link worked.

 

My halos and demon eyes are going to be wired to a switch

 

I think i'm going to do the same actually. I have a few leds out already ,luckily they're behind my shrouds.

 

Yea my only worry with the halos
If anything if mine go bad, ill get my refund and get led concepts halos and try them out

 

Do you have it wired to a relay too?

 

I got the HID Chrome version of these. No complaints here. The halo's and decorative LED's are wired onto a seperate circuit that is just on with the ignition is on. That way if I use the DTRL's or the headlights they are on. My DTRL's turn off when I turn on my headlights.

I run everything through relay's. It's a bit overkill and maybe unnecessary, but it's an extra safety net where I can separate high power draw (usually light bars) away from a lower power rated device (switchs, etc).

Pic looks good OP.

 

It will be
Anything I put on the truck will be relayed

 

I need to buy a fuse block first. I want to clean up my wires but haven't had the chance. Then I can buy your hood light kit of yours

 

is that yellow demon eyes?? I was going to do that too, post more pics if you can I wanna see how good they look!

 

Its amber demon kit from led concepts.
They were shipped yesterday so I'll get more pics when I install them and hook them up to switches and relays

 

oh so you didn't paint inside the projector? (demon eyes) it is just a light in there making that color? interesting.

 

I actually prefer this method, cause you can turn on the demon eyes whenever. And they also make them in RGB, more color