Maxtrac with allpro expo lift question

I got a lift question - I'm going to run Maxtracs with 5100's set at 1.75 up front with stock coils or I might get eibachs with the 1.6 lift and run the 5100's at '0' and in the rear I'm going to run all pro expos with fox 2.0 ifps . My question is would I get about the same ride with either and do you think I should change my front coils? Everything except the coils are already purchased I'm just waiting on the rear end to come in from allpro. I'm not worried about a little rake but level would be good to ,I just want it to ride nice and not look funny. thanks in advance for all your help.

 

Allpro standards will set the back up real nice, mine has right at 3.5" in the front and sets almost perfectly level. It might...might be a half of an inch higher in back. You will need to go about as far as you can in the front to keep it level, at 2.5" you will have a little rake but it would look fine. If you go with expos and run unloaded your gonna have a good bit of rake.

 

cool thanks bro