Long Travel BS Thread

good, so this hub kit doesn't need to be welded? What steering wheel did you go with?

 

As far as I know it's completely bolt on but the wheel can't be removed. I went with a Mod 78 in leather and a sweet disconnect that we welded to the colum. don't go with a suede wheel, suede gets trashed by bare hands.

 

Yeah I like the leather better, what disconnect did you got?

 

A sweet 6 bolt

 

No way! Thats crazy that it burst. We usually always go to Gordon's and we used to go out there and play in the diverted sections as well. I remember one time when the sections that were diverted were out toward the beginning of drags we were down in there playing in it and it was like silt and the wall we had to climb to get out was wayyyy steeper than test with almost zero run up to the base of it. I legitimately thought I may not make and or my CRF450 might blow up. Good times!

 

I know

You won't regret it though

 

post pictures! MCM's kit is friggen fun!

 

Nice! I ran that combo and the 50" made the 30" seem like it wasn't even on. What's your take on it?

 

I got the 30" in all Amber for the dust

 

If you have problems with glare on that 50", I ended up making a "visor" out of cheap angle stock that worked for my problem. mine is a cheap Chinese bar so ymmv, but I think the optical challenges would be the same.

http://www.ultimateyota.com/showthr...-to-wait-a-bit&p=113196&viewfull=1#post113196

 

I figured it would be a problem so I built one out of aluminum

 

I also need a shield for the glare, would you fab me one up?

 

Strait bar or radius?

 

It was easier than I thought, no steering wheel puller needed



Taco at the shop





Also saw this sick chevy at the shop

 

radius 50''

 

I don't have a radius bar to jig it off sorry

 

Is yours straight?

 

Yep it's the hyperspot

 

Nice, it looks radius on you pic. So can you fab me one up for a straight?

 

Sure but aren't you caging your truck? Seems like a glare guard should be pretty easy if you can build a cage.