Emergency install Help!!

I need help with ICON AAL instal ASAP. Please call 9516748795
Ask for Jose Thanks.

Stupid icon doesn't. Include instructions for their AAL or rear shock install.

 

I can't call you but I first recommend calling icon. If all else fails, aal installs should be fairly simple. Remove your leaf springs, use two c clamps on them to keep them from exploding off, and take off the lug nut off your center pin. Loosen the clamps and take the springs off the pin. Put the aal above your small, thick, factory overload leaf and below your factory pack. If icon sent you a longer center pin, use it. If not, try and use the current one. Then reinstall the way you Uninstalled. These may not be accurate for every product but it's how I did mine. Good luck and at the very least, bump.

 

It's a 3 leaf AAL pack, not the single AAL. My question is, do I remove the original inner brackets holding some of the springs ?

 

Yes

 

Grind it off and punch it out

 

Jose,

Check the pdf here:

http://www.iconvehicledynamics.com/wp-content/uploads/2013/09/Icon_51100.pdf

I didn't have to cut brackets on my springs.

 

Thanks bro. Awesome.

 

I hope you got what you needed op.

 

Thanks bro. I did what you said. Worked out perfect. I rechecked the PDF file below just to make sure we did everything Right in the end, turned out that our instincts were right on with icons instructions.