1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

*THE RTT Owners Thread (With BS)*

Discussion in 'Outdoors' started by ChamYota, Jan 23, 2014.

  1. Dec 26, 2014 at 6:23 PM
    #2601
    Spencer

    Spencer Future President

    Joined:
    Dec 19, 2012
    Member:
    #93415
    Messages:
    1,435
    Gender:
    Male
    First Name:
    TIGGLEBITTIES
    Upland, Chino... all of 909.
    Vehicle:
    2013 DCSB 4X4 6cyl Sex Machine
    Redline hood lift, Flyzeye cabin lights, tailgate lock, SPOD Power block, VIAR onboard air, Cobra CB radio, Firestick 4' Antenna, Hot Blonde CoPilot Mod, SIX 9" Hella 4000 HID conversion with external 55W ballasts, Six 6" LED bars, Napier Bed Tent, Mudflaps delete using rocks, Roof rack by Brute force, Rock sliders by Brute force, Bed LED lights, Underhood LED automatic lights, Constant 12V bed plug, Rugged race radio, ICON uniball UCA's, KING 2.5 700 rate coilovers, Deaver rear leaf springs, KING 2.5 resi rear shocks (Flat 0.15 stack on compression shims), Scangauge, Empty wallet Mod Bug disease, AllPro Apex front bumper, On board heat exchange shower & water pump (Heater Core intercept mod), On Board Air - Viair for now, ARB when it dies-, allpro Skids back to gas tank- Tepui RTT on the shittiest "Bed Rack" ever made.... AllPro U Bolt flip kit with timbren bumps NEXT UP- expo leafs & bed rack, hydraulic bumps in rear, Total Chaos stock LCA's w/ Bypass, Rear 12" shock hoop relocate
    8b9a22d23b4f8830f521d3b83fa1b61f_934016aab926e3863ff4069dadffa3912ec8bffe.jpg
    Glad to join this thread!
    e098c0922c0f18d6bcb0e737c0a93aaf_5c6e76e5689c70c848b804c5b5d62b11b0e82db5.jpg

    Anyone think this will work in the floor of the tepui kekunam ruggedized? I know the floor is thicker on that model. I'd love to be able to wire it up clean and flush mounted. I could make sure I didn't kill the battery with the meter, charge the phones and plug whatever else in. I wonder about the mounting depth though.
     
  2. Dec 26, 2014 at 6:32 PM
    #2602
    Whitecloud

    Whitecloud Cloudy-fabricator of things

    Joined:
    Feb 24, 2010
    Member:
    #32031
    Messages:
    4,424
    Gender:
    Male
    First Name:
    Johnathan
    Albuquerque, New Mexico
    Vehicle:
    Superwhite 06 DCLB
    ICON Extended travel Coilovers, Custom leaf pack, custom sliders and F&R bumpers, 295 75 17 Toyo Open Country MT's, On-Board air with F+R connectors, On-Board water with quick disconnect shower.Trimmed fenders and body mount chop. LOTS of wiring, dual battery setup, Solar charging system, with some random lights spread around here and there.
    ^^^^^^Where did you find that?
     
  3. Dec 26, 2014 at 6:46 PM
    #2603
    Spencer

    Spencer Future President

    Joined:
    Dec 19, 2012
    Member:
    #93415
    Messages:
    1,435
    Gender:
    Male
    First Name:
    TIGGLEBITTIES
    Upland, Chino... all of 909.
    Vehicle:
    2013 DCSB 4X4 6cyl Sex Machine
    Redline hood lift, Flyzeye cabin lights, tailgate lock, SPOD Power block, VIAR onboard air, Cobra CB radio, Firestick 4' Antenna, Hot Blonde CoPilot Mod, SIX 9" Hella 4000 HID conversion with external 55W ballasts, Six 6" LED bars, Napier Bed Tent, Mudflaps delete using rocks, Roof rack by Brute force, Rock sliders by Brute force, Bed LED lights, Underhood LED automatic lights, Constant 12V bed plug, Rugged race radio, ICON uniball UCA's, KING 2.5 700 rate coilovers, Deaver rear leaf springs, KING 2.5 resi rear shocks (Flat 0.15 stack on compression shims), Scangauge, Empty wallet Mod Bug disease, AllPro Apex front bumper, On board heat exchange shower & water pump (Heater Core intercept mod), On Board Air - Viair for now, ARB when it dies-, allpro Skids back to gas tank- Tepui RTT on the shittiest "Bed Rack" ever made.... AllPro U Bolt flip kit with timbren bumps NEXT UP- expo leafs & bed rack, hydraulic bumps in rear, Total Chaos stock LCA's w/ Bypass, Rear 12" shock hoop relocate
    Car DC Digital Voltmeter/Dual USB 2 Port/DC12V Power Socket Three Hole Panel https://www.amazon.com/dp/B00MODXVO8/ref=cm_sw_r_awd_dZHNub0PQ58NJ

    Amazon. Just googled flush mount USB charger and found that thing with all 3.
    I think I'll try the USB and meter because they look shallower than a cigarette plug, which I already have in my bed side.
    Stuck cause the listed part has no depth dimensions and I'm not sure how thick the floor of my brand new RTT is...
     
  4. Dec 26, 2014 at 7:05 PM
    #2604
    NorthwestCruiser

    NorthwestCruiser Well-Known Member

    Joined:
    Nov 20, 2013
    Member:
    #117000
    Messages:
    13,081
    Gender:
    Male
    First Name:
    Brian
    Snohomish, WA
    Vehicle:
    1996 Land Cruiser
    Custom 3 link, 40's etc..
    My ruggedized autana was pretty easy to drill through the floor. I had to move the rails closer together by about 2 inches each. Just used a bunch to get a little divit and then use a step drill bit. Its a sheet of diamond plate (1/8" thick maybe?) along with something else on the inside. BoxRocket can tell you better info as he sells them.
     
  5. Dec 26, 2014 at 7:07 PM
    #2605
    ian408

    ian408 Well-Known Member

    Joined:
    Nov 8, 2009
    Member:
    #25619
    Messages:
    19,534
    Gender:
    Male
    First Name:
    Ian
    Santa Clara, CA
    Vehicle:
    09 Tacoma
    I'd put it in an enclosure and use some kind of cord. That way, you don't compromise the integrity of the tent.
     
  6. Dec 26, 2014 at 7:09 PM
    #2606
    HomerTaco

    HomerTaco also HomerTaco Vendor

    Joined:
    Mar 28, 2010
    Member:
    #34129
    Messages:
    45,875
    Gender:
    Male
    First Name:
    HomerTaco
    HomerTaco
    Vehicle:
    HomerTaco
    HomerTaco ...................................................................................................................................................... Core-Hurst short throw shifter & T-handle / Carbon Fiber Interior / custom console light / De-badged / leather interior / Heated Front seats / Red Line Hood Struts / Painted speaker grills /one-off TRD Satoshi Grill with 12-15 front-end swap/ Pioneer AVIC-X920BT HU / Scangauge II / Black LED Tails / Dash Mount for iPad mini / Safari Snorkel / Auto-pilot mode / Leer 100XQ Cap / 4x Innovations sliders / Rear Diff Breather Mod / front windows tinted to 35% / Brute Force Fab Hybrid Front Bumper / BAMF Rear Diff Skid / Budbuilt Skids / CBI Trail Master 2.0 rear hybrid bumper / Fox rr coils/ TC UCA's/ TC spindle gussets/ TC Cam Tab gussets / Dakar leafs / Defined Engineering shackles / All pro U bolt flip / Timbren Rear Bumpstops / BAMF LCA skids / Exhaust re-route / Fog Light anytime Mod / LowRange Off Road extended rear brake lines / ATO Shackle Flip / sectioned Bushwhacker flares / re-geared to 4.56 / ARB Front & Rear Locking Diff / ARB CKMA12 compressor / PrInSu full rack system / 1" body lift / Inchworm 4.7 crawlbox / twin stick FJ t-case / Davez off-road triple-stick kit/
    I like that a lot.
     
  7. Dec 26, 2014 at 8:48 PM
    #2607
    JLink

    JLink Well-Known Member

    Joined:
    May 9, 2010
    Member:
    #36795
    Messages:
    12,582
    Gender:
    Male
    First Name:
    Josh
    Ocean, NJ
    Lifted, Locked, Armored. Ready To Wheel.
    Thats a sweet unit right there.

    I thought about something similar but decided I didn't want to damage the floor of the tent, then possibly kneel on the outlet and ruin the floor even more.

    Ended up with this- http://www.amazon.com/gp/aw/d/B000PB8CQI/ref=mp_s_a_1_6?qid=1419655400&sr=8-6&pi=AC_SX110_SY165_QL70

    Which I have in one of the pockets of the tent. Just run a long 12v cord down to an always hot 12v outlet in the bed or cab.


    Here's what I use for a cord- http://www.amazon.com/dp/B000Z0HVHA...d=1419655554&sr=1&keywords=12v+extension+cord


    I spliced the power and ground wires for the led strip in my tent to the power and ground wires on the 12v/USB outlet thing, so they are all powered by the same cord (with an inline switch before the lights).

    Now I can charge a phone, run a 12v fan in the summer, 12v heated blanket in the winter, etc and there's no permanent damage to the tent. Cord goes through the flap at the hinge.
     
  8. Dec 26, 2014 at 9:57 PM
    #2608
    V5ioV

    V5ioV My drinking team has a wheeling problem

    Joined:
    Sep 22, 2012
    Member:
    #87502
    Messages:
    8,244
    Gender:
    Male
    First Name:
    V5ioV
    Out n 'bout
    Vehicle:
    '13 Pewp Water Slut
    King 2.5 Rem Resi Ext Travel w/comp adj w/700# springs, TC Uni-Ball UCAs, ARB/OME Dakar Leaf Springs w/ King 2.5 Rem Resi w/comp adj and custm eyelets, Stealth Custom Series F-5 Wheels wrapped on: 285/75/16 Fierce Attitudes, BORA 2.25 wheel spacers, GOODRIDGE extended Brake lines, Triple-6" Double Row LED Light Bars behind lower grill, ATFL MOD, TRD Ball Type Shift Knob, Husky WeatherBeater Floor Liners, 60'' HiLift Xtreme, 4xInnovations Bolt-On Sliders w/Kickout, Spring Hanger Skid, Custom BlackPipe Fabs CMC and custom FYL Bed Rack, CVT Mt. Shasta RTT, Trasharoo, 4xInnovations HiLift Bedside Mounts, 4xInnovations Front Skid Plate, TOYWERX Ghost Raptor thin-lip Satoshi Grill, RedLine Hood Struts, 4xInnovations Transmission Skid and T-Case Skid Plates, Wheelers Rear SuperBumps Bump Stops, All-Pro Off Road U-Bolt Flip Kit, UltraGauge, ARB OBA, Pelfreybilt HC rear Bumper, Rotopax system (Single Mounting Plate and Bed Rail Mounting Plate both with LOX handles.
    I like that 12v extention idea...
    I'm about to look at 12v heating blankets!
     
  9. Dec 26, 2014 at 10:25 PM
    #2609
    Spencer

    Spencer Future President

    Joined:
    Dec 19, 2012
    Member:
    #93415
    Messages:
    1,435
    Gender:
    Male
    First Name:
    TIGGLEBITTIES
    Upland, Chino... all of 909.
    Vehicle:
    2013 DCSB 4X4 6cyl Sex Machine
    Redline hood lift, Flyzeye cabin lights, tailgate lock, SPOD Power block, VIAR onboard air, Cobra CB radio, Firestick 4' Antenna, Hot Blonde CoPilot Mod, SIX 9" Hella 4000 HID conversion with external 55W ballasts, Six 6" LED bars, Napier Bed Tent, Mudflaps delete using rocks, Roof rack by Brute force, Rock sliders by Brute force, Bed LED lights, Underhood LED automatic lights, Constant 12V bed plug, Rugged race radio, ICON uniball UCA's, KING 2.5 700 rate coilovers, Deaver rear leaf springs, KING 2.5 resi rear shocks (Flat 0.15 stack on compression shims), Scangauge, Empty wallet Mod Bug disease, AllPro Apex front bumper, On board heat exchange shower & water pump (Heater Core intercept mod), On Board Air - Viair for now, ARB when it dies-, allpro Skids back to gas tank- Tepui RTT on the shittiest "Bed Rack" ever made.... AllPro U Bolt flip kit with timbren bumps NEXT UP- expo leafs & bed rack, hydraulic bumps in rear, Total Chaos stock LCA's w/ Bypass, Rear 12" shock hoop relocate
    Yeah I'm stuck between making a sweet install all flush mounted and using a 12v extension cord and splicing this setup into it and just leaving it set in the tent pockets. Only draw back is damaging it when I fold it up, where a flush mount wouldn't really hurt anything other than leaving permanent holes in the floor if I had to remove it.
    Decisions decisions....
     
  10. Dec 26, 2014 at 10:26 PM
    #2610
    ian408

    ian408 Well-Known Member

    Joined:
    Nov 8, 2009
    Member:
    #25619
    Messages:
    19,534
    Gender:
    Male
    First Name:
    Ian
    Santa Clara, CA
    Vehicle:
    09 Tacoma
    This is where a dual battery configuration would be ideal :D
     
  11. Dec 29, 2014 at 10:30 PM
    #2611
    Spencer

    Spencer Future President

    Joined:
    Dec 19, 2012
    Member:
    #93415
    Messages:
    1,435
    Gender:
    Male
    First Name:
    TIGGLEBITTIES
    Upland, Chino... all of 909.
    Vehicle:
    2013 DCSB 4X4 6cyl Sex Machine
    Redline hood lift, Flyzeye cabin lights, tailgate lock, SPOD Power block, VIAR onboard air, Cobra CB radio, Firestick 4' Antenna, Hot Blonde CoPilot Mod, SIX 9" Hella 4000 HID conversion with external 55W ballasts, Six 6" LED bars, Napier Bed Tent, Mudflaps delete using rocks, Roof rack by Brute force, Rock sliders by Brute force, Bed LED lights, Underhood LED automatic lights, Constant 12V bed plug, Rugged race radio, ICON uniball UCA's, KING 2.5 700 rate coilovers, Deaver rear leaf springs, KING 2.5 resi rear shocks (Flat 0.15 stack on compression shims), Scangauge, Empty wallet Mod Bug disease, AllPro Apex front bumper, On board heat exchange shower & water pump (Heater Core intercept mod), On Board Air - Viair for now, ARB when it dies-, allpro Skids back to gas tank- Tepui RTT on the shittiest "Bed Rack" ever made.... AllPro U Bolt flip kit with timbren bumps NEXT UP- expo leafs & bed rack, hydraulic bumps in rear, Total Chaos stock LCA's w/ Bypass, Rear 12" shock hoop relocate
    Hahahahahahaha its 41 degrees outside (this is the dead of SoCal winter)
    3ee4faa1f9f1424c28ea9567c0006f84_84ed7fae61a63d939db75a3a7c06cf280c0de81c.jpg

    Not that this thing is accurate in the slightest but this is the greatest thing ever.
     
  12. Dec 30, 2014 at 7:00 AM
    #2612
    JLink

    JLink Well-Known Member

    Joined:
    May 9, 2010
    Member:
    #36795
    Messages:
    12,582
    Gender:
    Male
    First Name:
    Josh
    Ocean, NJ
    Lifted, Locked, Armored. Ready To Wheel.
    yea i think it would definitely stick out the bottom side of the floor, so if you can find something (or make something) that covers that part and maybe reinforces the floor a bit you'll probably be ok.

    any heat in there or just body heat?
     
  13. Dec 30, 2014 at 8:21 AM
    #2613
    Spencer

    Spencer Future President

    Joined:
    Dec 19, 2012
    Member:
    #93415
    Messages:
    1,435
    Gender:
    Male
    First Name:
    TIGGLEBITTIES
    Upland, Chino... all of 909.
    Vehicle:
    2013 DCSB 4X4 6cyl Sex Machine
    Redline hood lift, Flyzeye cabin lights, tailgate lock, SPOD Power block, VIAR onboard air, Cobra CB radio, Firestick 4' Antenna, Hot Blonde CoPilot Mod, SIX 9" Hella 4000 HID conversion with external 55W ballasts, Six 6" LED bars, Napier Bed Tent, Mudflaps delete using rocks, Roof rack by Brute force, Rock sliders by Brute force, Bed LED lights, Underhood LED automatic lights, Constant 12V bed plug, Rugged race radio, ICON uniball UCA's, KING 2.5 700 rate coilovers, Deaver rear leaf springs, KING 2.5 resi rear shocks (Flat 0.15 stack on compression shims), Scangauge, Empty wallet Mod Bug disease, AllPro Apex front bumper, On board heat exchange shower & water pump (Heater Core intercept mod), On Board Air - Viair for now, ARB when it dies-, allpro Skids back to gas tank- Tepui RTT on the shittiest "Bed Rack" ever made.... AllPro U Bolt flip kit with timbren bumps NEXT UP- expo leafs & bed rack, hydraulic bumps in rear, Total Chaos stock LCA's w/ Bypass, Rear 12" shock hoop relocate
    I was thinking even if it does mount deeper than the floor is thick, I'll just make a spacer plate to mount it through- a flat plate that sticks up 1/2" or so in the corner of the tent really wouldn't bother anyone and it'd be so badass to have all that wired in right next to you. No cords to get tangled or anything.

    ed9c82c29d68380e409a98f2d7c7ec91_5c32b56f1a02298e21ed752d5f677672b32ccfbb.jpg

    This thing is a lifesaver
     
  14. Dec 30, 2014 at 8:23 AM
    #2614
    TacoIII

    TacoIII Mr. Boombastic

    Joined:
    May 4, 2010
    Member:
    #36532
    Messages:
    2,097
    Gender:
    Male
    First Name:
    Andrew
    Albuqerque
    Vehicle:
    10 Taco 4x4 off road package
    3" OME 886 coils, ARB bumper warn M8000, Lightforce 240's and 255/85 16 KM2, Redline hood struts,arb twin air compressor, 4.88's, Tepui kukenam, Pelfreybilt bed rack and rear high clearance with swing out, and custom offroad bodywork
    Just got my little buddy for Christmas and hopefully i will be trying it out this weekend.
     
  15. Dec 30, 2014 at 8:26 AM
    #2615
    johnboyTRD

    johnboyTRD Well-Known Member

    Joined:
    Sep 19, 2013
    Member:
    #112818
    Messages:
    3,226
    Gender:
    Male
    First Name:
    John
    South SF bay
    Vehicle:
    2003 Tacoma Double Cab TRD
    Full ome lift, nitro charger sports all 4 corners (rear shocks relocated), Dakar pack w/ AAL, 882 coils, diff drop, toytec 1" shackles, trail gear low profile front bumper, Tuff Stuff winch, bamf sliders, RAT skids, BAMF Bed Rack, Tepui Kukenam RTT, RAT rear bumper,
    Yeah the little buddy worked well for me - just pop it on while you are getting ready for bed so the tent is warm. I turn it off when I close my eyes as a precaution... When you wake up turn it on and wait til it is warm enough to get outta the bag.

    I did this ^ solo in the tent in 30ish degree weather wih my 0degree mummy bag and stayed reasonably warm.
     
  16. Dec 30, 2014 at 2:38 PM
    #2616
    NorthwestCruiser

    NorthwestCruiser Well-Known Member

    Joined:
    Nov 20, 2013
    Member:
    #117000
    Messages:
    13,081
    Gender:
    Male
    First Name:
    Brian
    Snohomish, WA
    Vehicle:
    1996 Land Cruiser
    Custom 3 link, 40's etc..
    Sounds exactly like what my weekend will be like. High 20's at night so Ill be using my little mr buddy heater. Think I should put the annex up? I was thinking the smaller space of just the tent the heater will work better
     
  17. Dec 30, 2014 at 2:48 PM
    #2617
    johnboyTRD

    johnboyTRD Well-Known Member

    Joined:
    Sep 19, 2013
    Member:
    #112818
    Messages:
    3,226
    Gender:
    Male
    First Name:
    John
    South SF bay
    Vehicle:
    2003 Tacoma Double Cab TRD
    Full ome lift, nitro charger sports all 4 corners (rear shocks relocated), Dakar pack w/ AAL, 882 coils, diff drop, toytec 1" shackles, trail gear low profile front bumper, Tuff Stuff winch, bamf sliders, RAT skids, BAMF Bed Rack, Tepui Kukenam RTT, RAT rear bumper,

    I can't see how it could hurt :-/
     
  18. Dec 30, 2014 at 3:33 PM
    #2618
    Spencer

    Spencer Future President

    Joined:
    Dec 19, 2012
    Member:
    #93415
    Messages:
    1,435
    Gender:
    Male
    First Name:
    TIGGLEBITTIES
    Upland, Chino... all of 909.
    Vehicle:
    2013 DCSB 4X4 6cyl Sex Machine
    Redline hood lift, Flyzeye cabin lights, tailgate lock, SPOD Power block, VIAR onboard air, Cobra CB radio, Firestick 4' Antenna, Hot Blonde CoPilot Mod, SIX 9" Hella 4000 HID conversion with external 55W ballasts, Six 6" LED bars, Napier Bed Tent, Mudflaps delete using rocks, Roof rack by Brute force, Rock sliders by Brute force, Bed LED lights, Underhood LED automatic lights, Constant 12V bed plug, Rugged race radio, ICON uniball UCA's, KING 2.5 700 rate coilovers, Deaver rear leaf springs, KING 2.5 resi rear shocks (Flat 0.15 stack on compression shims), Scangauge, Empty wallet Mod Bug disease, AllPro Apex front bumper, On board heat exchange shower & water pump (Heater Core intercept mod), On Board Air - Viair for now, ARB when it dies-, allpro Skids back to gas tank- Tepui RTT on the shittiest "Bed Rack" ever made.... AllPro U Bolt flip kit with timbren bumps NEXT UP- expo leafs & bed rack, hydraulic bumps in rear, Total Chaos stock LCA's w/ Bypass, Rear 12" shock hoop relocate
    I've used it in rainy 30 degree weather and left it running all night. No issues whatsoever. Just gotta remember that propane burns and leaves water vapor behind so you get condensation pretty bad without ventilation . as far as suffocating, my super scientific trial and error testing says the condensation will make you open the window to vent before you could ever die, assuming the little buddy's O2 level trigger thing somehow fails and keeps burning. Itll keep your whole tent hot for about 6 hours before running dry
     
  19. Dec 30, 2014 at 3:35 PM
    #2619
    Idaholandho

    Idaholandho The other white meat

    Joined:
    Sep 25, 2014
    Member:
    #139087
    Messages:
    7,207
    Gender:
    Male
    Vehicle:
    3 Now - 2022 Trail Edition, 2015 TRD 4x4 and a 2006 SR5 4x4
    2015 Tacoma, Magnuson Supercharger, Bully Dog Flash and GT, Safari Snorkel, Toytec BOSS 2.5 Coil Over Front, Toytec BOSS Aluma 2.5 Rear, Toytec 10 Leaf Pack, Stainless Brake Lines, Icon UCA's, CBI Reverse Adj Shackle Mounts, CBI Ubolt Flip Kit, Timbren Bump Stops, CBI Bushmaster 2.0 Front Bumper w/ Warn M8000S Winch and SR2 Rigid Flood Lights, CBI Bushmaster 2.0 Rear Swingout Bumper, Rigid SR2 backup lights and Dual RotopaX / Fuel/First Aid Pack, CBI Rock Sliders, CBI Full Skids and CBI Rear Diff Armor, BAMF LCA Skids, FrontRunner Outfitters Slimline II Roof Rack w/ Rigid SR2 40" Combo Light Bar, Rock lights, Rigid pods in Bed Rack, Intelligent Battery System w/ Dual NorthStar batteries, Spod Power Distribution, illuminated switch panel in sunglasses holder, Viar Extreme Duty On-Board Air w/ 2.5 Gallon Tank under bed, Air 2 Air Sys, Magnaflow Exhaust, Fuel Off Road Trophy Wheels, 285/75/17 Toyo Open Country R/T, Diff breather mod, FX-R BHLM Demon Eye headlights, Esuse LED Fog Kit, Pelfreybilt Camera Relocation mount, Pelfreybilt ax/shovel bed mount, Debadged, tint, a 2006 Tacoma SR5 and a 2022 Trail Edition
    [​IMG]
     
  20. Dec 30, 2014 at 3:52 PM
    #2620
    NorthwestCruiser

    NorthwestCruiser Well-Known Member

    Joined:
    Nov 20, 2013
    Member:
    #117000
    Messages:
    13,081
    Gender:
    Male
    First Name:
    Brian
    Snohomish, WA
    Vehicle:
    1996 Land Cruiser
    Custom 3 link, 40's etc..
    No way im falling asleep with a propane heater running in a tent haha, i'd just let it warm up to take the edge off, not to make it a sauna
     

Products Discussed in

To Top