Official Tennessee Thread

Fucking sell those damn things and get the right pods lol

 

Jesus what are you putting on there

 

They are Avec 3x3 led pods. I didn't realize how big they were when I ordered them lol. But I'm too cheap to lose money selling them and get different ones so I'm just gonna make these work

 

Haha thinkin the same thing. Wtf

 

Nah, brackets seem like a better and cleaner alternative to me

 

Paint finally cured enough that I could get the tires mounted. 1 inch wheel spacers make them sit nice and flush down the side.
May trim some plastic off the fender flares at lower corners for some extra clearance when it flexes out. These are 285/70 so I can only imagine the amount of trimming that would be needed to clear 35s.

 

Yea these are the exact same concept but the area around the hood mount has like 3 open holes there. These utilize 2 of those holes (plus the hood mount bolt itself so 3 total per mount). Driver side went on in 5 min, the passenger side just didnt clear by about 1/8" so instead of hammering a bolt in and messing up the threads, I had all day so I made it nice haha DONT JUDGE ME!

 

a 20" light bar on each bracket...DUH! lol

 

Trading my SOS bumper for a trail gear bumper here in the next couple of weeks. Just gotta find time to go meet the guy

 

whats the bumper look like?

 

Why?

 

Dude ........ That's fuckin clean. Looks really good. And you'll have to trim. I had to trim quite a bit of plastic when I had 33s on

 

Adam, your truck looks so damn good with the fender flares off. If I had an aftermarket bumper, I would rip my flares off today.

Also, anyone replaced a fuel pump on our trucks before? I don't need to, but my jeep NEEDED one replaced. I tackled that all yesterday and learned that dropping a 1/2 full gas tank is not fun and is a bad idea. It was a pain in the ass, but I also put a upgraded skid plate my buddy gave me. Just a stock gas tank skid with 1/2 steel welded to the bottom haha.

 

I haven't yet but I don't think it would be that bad of a job

 

Well last night Katie killed my new tire fund lol... we went and picked out wedding bands haha

 

I'd say replacing the fuel pump on our trucks wouldn't be too bad of a job because we can unbolt our beds. That's what I did when my fuel pump went out on my ranger. 6 bolts some rope and viola

 

Doesn't she understand that you have priorities?

 

Pulling the bed off is really easy

Yea but if I do this now, that means I can make a bigger purchase later... 1600 for tires is a pretty big cost haha

 

Thanks. The flares are going back on once I trim them and trim my fenders. These wheel spacers put the tires too far out not to have them.

 

I see none of these pics ......

And I replaced the pump in my 94 and it wasn't bad. There also wasn't any gas in it when I dropped it. Haha and as stated, 6 bolts and the bed comes off