2015 Black Fog Light Cover Housing

How hard is it to get off so I can put my amber Lamin X fog light covers on?

 

You need to gain access from inside the fender liner to pop off a blue lock tab that holds each side. It would be easier to take the foglights off probably.

 

Thanks guys, I thought maybe the black surround was just in by tabs or something.

 

It is in tabs otherwise. Like I mentioned though, there's one blue lock tab that has to come out or you will break something lol

 

Yeah I think I will wait until summer time. Just tried getting a tool and both hands up in the fender liner to pop the blue tab. Not meant for big handed people. Kind of broke the blue tab a little and now it probably won't come out. Don't understand why shit has to always be so complicated for the non gear head people.

 

So probably remove the lower fender inner wall and front little mud flap and just take out the whole fog light? Probably be a better install with the fog light in hand anyway.

 

Sweet good to know. Just really wanted to get this done, tired of looking at the Lamin X stuff

 

Just wish tinkering wasn't like fucking rocket science.

 

A lift I want to do a nice lift besides my level of 1.75. Just don't want all the issues. Was thinking of an OME set up. But I don't know.

 

So I was thinking of buying that other members new 885x's. I already have a 1/4 Toytec top plate spacer. Not sure if that can be used with the OME springs. But what else would I need for the front to do the full 3 inches? Besides new UCA's

 

Yeah not adding a bumpers or skid plates yet. So maybe this is not for me. But I would just get the trim packer instead of the spacer. Wish there were more mod days around, instead of paying a bunch of money to a shop to get this shit done.

 

Yeah I have the new 5100's already. Toytec has a pre assembled set for 599.99.

http://toyteclifts.3dcartstores.com/ToytecBilstein-5100-coilovers_p_363.html

Then selling my current Sport springs with 5100's set at 1.75 after.

 

Or this one

http://toyteclifts.3dcartstores.com/3-lift-kit-with-Bilstein-5100-Front-Coilovers_p_364.html