Bilstein 5100 and OME 885X ready to install

I have a pair of Bilstein 5100 and OME 885X coilovers i just took off my 2006 Tacoma after approximately 10k miles on them. I left them dirty as you can see in the pictures from road grime as this is my commuter truck. There is nothing wrong with them, they work perfectly, but just didn't give me enough lift to clear my 325's. I replaced them with another set of adjustable Bilstein 5100 from Toytec. These Bilsteins are set with the adjustment clip at zero and gave me approximately 2.5" of lift on my 2006 doublecab pre-runner. They are fully assembled and ready to bolt on. To install them i would recommend either getting a sway bar relocate kit or remove the sway bar altogether. I just put a relocate kit on mine and cleared the coils easily. I also did have a set of Light Racing upper control arms so i have no idea if it will clear stock UCAs.
$old plus shipping. I have them boxed up and would ship via UPS to the continental US only please. Paypal only please.

 

Bump. Not sure if this helps or not, but for additional reference. I put 885 and 886 coils on the same bilstein 5100 set at 0 on my double cab, trd sport long bed. I clear stock uca and sway bar without any issues. I did install a diff drop and also replaced the needle bearing with the ecgs bushing since i had the cv vib. These should bolt right up without any issues and provide a nice ride for anyone looking to lift.

 

Where in Texas r u

 

PM sent..

 

Great info thanks!

 

Dallas area

 

I'm interested!!

 

Interested also

 

Sold folks.. Thanks for all the interest !