Northern Virginia Roll Call

Looks good and I love your bumper. There is a great car wash in Manassas off of Sudley where you can use a high pressure hose to blast that salt away. Makes it easy to take care of the under carriage.

 

Met with Skygear today and watched him work his magic on my Tacoma. The result was some smoothly wired bright ass ditch lights! Well done sir:

 

Awesome!

 

Who's installing your lift? I can do it at my shop for a small fee

 

Did you get your lift on yet?

 

Damn, looks sweet. I am so short on time and long on great ideas, nevermind money (but who cares about that).

 

Skygear and I were waiting for you to turn them on when you pulled away. And you're right, pics just do them justice. Looks badass!!

 

Looks solid. Which lights did you go with? And what switch panel is that - looks real clean.

 

Was awesome working on your trucks guys!

 

THanks! The Rigid Duallys and Ditch Brackets were only about $200 through CBI Off-Road. Not too bad!

 

Ha ha I didn't want to blind you guys ... but I did show them to an oncoming SUV who flashed me about 30 seconds after I left.

 

Great day! You guys were tons of fun.

 

Thanks! I got the Rigid Duallys (flood pattern) and the ditch brackets here: http://www.cbioffroadfab.com/products/2nd-gen-toyota-tacoma-products/t2-ditch-light-brackets

And the panel is from Iggys group buy located here: http://www.tacomaworld.com/forum/group-buys/352289-switch-panel-gb.html

 

Here's another pic of the actual Duallys during the day:

 

Throwing a feeler out there... I'm in the middle of a divorce and trying to get myself debt free when it is all done. Considering selling my 06 TRD OR DCSB. 108k miles. 5100 Bilsteins front & rear, 885 coils up front, TSB leaf packs with Toytec aal. MT Sidebiter wheels with brand new 285/70R17 Terra Grappler G2s. Weather Tech mats & wind visors, OEM bedmat, Tonneu Pro cover, NFab step bars, JBL system w/ 6 disc & factory sub, US Spec iPod interface, K&N air filter. Pads, rotors, & calipers replaced in late Nov ($350). LCA bolts replaced & alignment done in late Dec ($650). Tires less than 2 weeks old ($1100). Has a few stone chips in paint & some rust on bottom of step bars, but truck is solid. Frame has surface rust, but no holes. It is covered under frame rust warranty extention (not done yet). Can be seen in signature pic. Asking $18,500.

 

Sucks man. I'll let a couple buddies looking for good deals know about your truck. Best of luck.

 

Well the wife and are looking at getting a popup camper this summer. I am putting my CDN M101 up on the chopping block. 1992 Canadian Military 1/4 ton off road trailer used as a small camping trailer to pull perfectly behind small or large SUV's. Perfect size for Jeeps. This trailer is similar to the older U.S version Viernam M416 trailers but is a little emote stout and were made in 1992 in which only approx 2000 of these trailers were made to pull behind the Canadian Iltis. The previous owner had this trailer sandblasted and painted to match his Toyota Landcruiser, coated inside and underside with Rust Bullet protectant, and undercoated bottom and then painted black under and white on exterior. The trailer has tailgate as well as added a small Military aluminum curved tongue box, relocated the parking brake handle, had a very heavy duty 4 piece folding lid system made with military rubber adhered on lids, added 11 military tie downs on lid also has interior tie downs that are built with the trailer. The trailer rack system with stainless steel gas struts to raise the rack to an elevated height. I currently have a Tupei RTT mounted to it that is NOT included in the sale. The CDN Has a built in tent that can sleep one comfortably on the lid with the black sunbrella fabric cover insulated with sewn in military poncho liner and bug screen to let the breeze in during the summer. The previous owner had the axle and leaf springs new bearings, new brake pads, were taken apart, sandblasted and primed and coated with rust bullet and black chassis paint and the drum hubs were swapped out for new ones with Toyota 6 lug pattern to match pulling vehicle and so you only have to carry a spare between the two. Tires are like brand new 255/85-16 BFG KM2 Mud terrain's are mounted on Toyota Landcruiser split rims. The trailer uses pintle hitch system (i will include the receiver). Has folding stabilizer leg in front and rear that are easily adjustable as well as a 2" receiver hitch on rear to carry bike holder or what not and has working parking brakes. Box dimensions are at the widest and longest are 4'x6' and approx 18" box interior height....box tapers narrower at bottom. Rack at lowest position is approx 25" above lids and when struts are released to extend it raises another 12-15" approx. This gives a decent amount of room to sit up while sleeping on lids. Also included is a awning that extends 10 feet off of both sides and a Honda EM650 generator and a stainless steel counter that I have for the back of the trailer (still needs to be mounted). The CDN M101 Currently has Texas plates and title. Price is $4,500 obo. I can bring the CDN to the meet tomorrow if any one is interested. My cell is 77five-3five4-836five

 

Flippin badass! GLWS!

 

I'll be selling my Westin Bull Bar as soon as I remove the mounting brackets, probably this weekend. Just wanted to see if anyone in Northern Virginia was interested before I posted over on one of the other threads. I'll take pics this weekend too, but here is the one I have: (Black with silver skid piece)

http://www.realtruck.com/westin-ultimate-bull-bar/R181652P2014Y608MA.html

 

Damn. I really wish I had some cash for you... Exactly what I need to get my RTT off my truck....