4.10 vs 4.30 gears on 2007 2.7 tacoma automatic

I got a 2.7 2007 tacoma and want to regear but I don't no what gear would be better for my truck I got 32 by 11 in a half wide BF Goodrich tries. ..

 

Says you have a 5 lug and a 2.7, I think you already have a 4.10 r&p in the rear so I would keep it that way. Also I don't know of a mfg that makes 4.30s for the 8.4 rear end.

 

Hmm seems you are right..
http://www.tacomaworld.com/forum/4-cylinder/283405-regear-5-lug.html

I did not know this, good stuff.

Well OP I would go with 4.10s honestly.

 

i know the 6 lug 4cyl tacos have 4.10's

5 lug tacos no clue, i doubt they have 4.10's due to the smaller stock tire size

 

4.56s.

Here's why: The automatic transmission has a .71 overdrive vs the manual tansmission's overdrive of .81. 4.56s with an auto will still turn less rpm on the highway than a manual truck with 4.10s. I honestly think this is why the auto feels more gutless.

Anyway, don't fear the gear. A tad too low is easy to learn to live with. A tad too high and you'll always be wanting more.

 

Agreed. Stock 4cyl 6lugs run 30.4" tires and 4.10 gears. With 32" rubber, 4.56's would be a good match, 4.88s would work well too, especially with the tall OD ratio.

 

I have a 5lug with 3.73 stock grears I think ...I also have DT header with afe cold airintake with magnaflow exhaust so 430 should be good with my 32 it should put me at 2500 rpms at 75 ....so idk 4.10 or 4.30 or 4.56

 

My rear is a 8 I believe