285/75r17 or 295/70r17?

Which size would be easier to fit with a 2.5" lift? I would like to do as little trimming as possible and definitely don't want to cut my fenders.

 

And you'll probably need some new gears.

 

Both. One tire is almost 35" tall, the other almost 34". Cab mount chop, fender and flare trimming, pinch weld fold, wheel backspacing aruond 4-4.5". That'll get them mounted up, might still rub crossed up.

 

I ran 295/70/17 cooper stt ' s and had no problems with them with the cmc.

 

One is 33.2" and the other is 33.8". I know both will require a cmc, my question is which will require LESS trimming. I don't do any off roading.

 

look at your numbers bruh.. lol chances are the 295s are going to require more. I haven't seen many people on here run 285/75/17s.. A lot run 285/70/17s though. Cab mount chap, remove mud flaps, and you may get by.. Not very noticeable.

 

The wheels I'm looking at are 17x9 with 4.53" of backspacing and -10mm offset.

 

A 285/75/17 is bigger than a 295/70/17 IIRC

 

Probably.

I had to cut a considerable amount on my Frontier with 285/75/16s..

 

A 285/75/16 is a good bit smaller than a 285/70/17.

 

Same diameter no ?

Or did you mean 285/75/17 ?

 

Yep thanks OZ-T....meant 285/75/17*