17 inch TRD wheels Matte Black.

No bro I never really wanted these wheels. Like I said this deal want for me. But I do like the bronze Beadlock style wheels. But I think in other threads people have said that if you go full 3 with new UCA's and 285's it will rub the aftermarket UCA's. Because there is not enough offset on the wheels I believe. And when I lift my trucks 3 inches I always use aftermarket UCA's. But I don't like to use spacers on wheels that's all.

 

So your going with the Light Racing UCAs? Good luck with your lift! (Also, I thought you already had Bilsteins installed down here in RI?)

 

I have the 5100's at 1.75 and no tear lift. This is my 5th Tacoma and finally want to get something top notch in it. And Camburg has new ball joint UCA's with the ball joint already pressed in it. I do like LR UCA's but love the look of Camburg

 

I gotcha, I saw those Camburgs with the ball joints pre-installed, but I decided to buy them separately because it was a lot cheaper. I also didn't want the hassle of setting up the LR UCAs, so thats why I bought the Camburgs. And I agree, the Bilstiens are nice, but Icons are a lot better!

 

Can someone hold a yard stick up against the site and to show how flush it comes with the front and rear fenders?

Im considering replacing my trd fake beadlock wheels that came on my baja with these... or maybe getting spacers... Just trying to compare.

 

Thanks for the props. I can tell you that at 2" with 275/70/17 I had to remove the small front mud flaps on the front. I still lightly rub the rear mud flap on the front at full lock on the street. If I was doing serious off roading I would need to raise the front some more and remove the mud flaps. No clearance issues on the inside of the wheel rubbing the suspension or frame.

 

Thanks ... I get asked a lot where I bought the wheels

Can't go wrong with black though

 

Where did you guys get your tpms valve stems? Or did you guys use the ones on your stock rims?

 

TPMS, and lugnuts from my 2015 TRD Sport swapped over to the new rims

 

It was going to be too expensive to get new TPMS sensors, so I'm keeping my old ones. The tire shop is only charging a couple extra bucks to swap them over when they do the mount and balance for the new tires and wheels.

 

Crap....I guess I should have checked tire sizes prior. I was about to order 285/70/17's but they don't fit the 17x7 size rim....

 

In case anyone was wondering, I just mounted some 265/70/17 Hankook ATM's on these rims and I do have a slight rub in reverse with wheels cranked. Everything seems fine otherwise. I'll be putting on 5100's @ 1.75" to level soon, so I assume this will take care of the rub.

 

Yes it will bro

 

Pull the micro mud flaps at the front of your front wheels, fixed it for me

 

Why are those little things even on there to begin with?

 

Not sure if this is still going on, but I just emailed Lisa in case it is. I just bought my super white TRD Sport on Monday and would love to get a set of the matte blacks on her.

 

She still has them. At last I checked she did.

 

You won't be disappointed

 

Got any fresh pics of the ride brother?

 

Just got the last matte black set from lisa. They should be here end of next week. CANT FLLIPPIN WAIT!