AVEC LED Lighting

I had a 50" using the roof rack holes. If you have the roof rack 40" is perfect. As stated above

 

Dang you've got a lot of time on your hands

Thanks for scoping it all out though. I have that bar with 5w crees and spot or combo right now.

Pods I will have in spot and flood.

 

Thanks, but again that requires: "LIGHT BAR ROOF RACK MOUNT (For 41'-42.5" LIGHT BARS)" So it seems the 40" bar would be too short. Has anyone tried this?

 

40" bar end to end is actually 41.5"

 

Okay perfect! I guess I know what I need to order.

 

Best me to it.

I don't have a Toyota roof rack but I'm hoping Mike sends me one for free to test













Jk

 

Woooooooooo!!!!! haha

 

Order today and you should have it tomorrow

 

Small problem, that guy doesn't make the mounts anymore, so back to square one. I need to find a bracket that will work with the roof rack.

 

Which Pods are they, the 4 LED, 6 LED... There have been a few different sets over the last 67 pages. How much? Also for a 1st gen what do you have in terms of LED's for license plate light, dome light, map lights, brake lights, turn signals etc?

 

6 led type. 70.00 for the pair, and for the first gen i have all of the above.

 

PM'ing you. Thanks!

 

You got it bud.

 

Wanting to locate a 30' combo on the lower grill like Gym_Jam. I know you used the bracket from Rigid Industries. Is it necessary to use this bracket? Has anyone mounted it with what comes with the light in this location?

 

I just used 2 self tapping screws into the crash bar.

 

Thanks that should save me about $90

 

Ok so it looks like relentless' mount is for a curved. i found a website called MCM fab with some mounts, the 50" straight mount looks good, would it work? heres the url http://stores.mcmfablv.com/vehicle-light-mounts/

 

Mounted my 40" Optic bar..

Oh em gee

So many bright! More of a spot than anything, so It compliments my 20"
also, the wiring harness is superb.
Thanks Mike!

 

Here it is. Sorry it took so long. But i used Super Bright LED roll bar mounts. and jerry rigged it to make it work. The bolts included with the light bar were not long enough, so i went to ACE and got longer bolts with two nuts per side and washers. I threaded a nut onto the bolt as tight as i could and made it take up space inside the cutouts for the bracket. Than i put washers on each side and pieced it all together. This is kind of confusing..Sorry.

 

Sweet! I did mine a little different. I actually cut the legs it came with down and notched them to fit my roof rack then welded them to it. Ill post some pics in a bit. Does your bar have the rippled reflectors on the outside 6 less per side?