2014 March batch for Devil Horns and Model T

The end of March batch is almost here so if you have any plans on ordering you should do it soon. After the batch in march ends the next batch will be in July.

 

I like the Truck symbol but I have a mesh grill and would need it to stick on is that possible brother? And nice work.

 

You're talking about Model T emblem and yes, you can definitely install into mesh/satoshi grille. Model T has 8 threaded holes in the back in order to use it with a mid bracket (front Toyota grille) or a hitch bracket (use as a hitch cover). With those 8 threaded holes you can install it onto your mesh grille, hardware is also provided (#10-32 screws 3/8 long, total of 4 screws provided).

 

So I would have to drill into my mesh grill to do it?

 

Not at all,

I have never heard of anyone having to drill their mesh grille.
The screws provided have an OD of .190 inches so as long ad your grille has the openings at least .190 you should be OK.

 

I had HomerTaco's Mx mesh and using all four screws, I had to widen a couple spaces to get it perfectly centered, but that is very narrow slotted mesh.

Most of the mesh will fit without this modification though.

 

So do I just need the emblem or the backing plate as well?

 

You don't need the mid bracket, the mid bracket is only if you plan on installing the emblem onto an original Toyota grille. The Model T emblem will be just fine
= ]

 

Did you happen to have side by side pics of the 2 sizes for comparison. Thinking the smaller one would look best on the mesh grill with the Hella 500's behind it

 

I don't have a picture of both of them side by side and I'm at my day job right now, I'll post one when I'm home. Meanwhile, here are the measurements for both Model T's:

Model T sizes:
[FONT=&quot]Big Model T (emblem size 6.8 in. by 4.7 in, recommended for oval width 5.5in. and above)[/FONT]
[FONT=&quot]Small Model T (emblem size 5.5 in. by 3.8 in, recommended for oval width 5.5in. and below)[/FONT]

 

Okay I'll take a 5.5 inch Model T as shown above that is Silver, with black in the cavity. What size is on this truck pictured? Which ever size that is that is what I want please.

 

The one on that truck (my truck) is the Large Model T
The Small model T is the same size emblem as the 2005-2010 Tacoma

 

Okay how much is that one? The large one shipped to 01501? And do I just order it off your site? You do the same for a 2 inch receiver correct?

 

You should order from the site, it will give you all prices and shipping cost to your address. I don't have any more 2" receivers in stock but I'll have them available late April / early March.

 

And it come black and silver as shown brother? And with the little screws for securing it to the mesh?

 

All of them come hard black anodized and the logo is brushed aluminum with a layer of clear coat. Hardware is included.

 

Sweet thanks

 

Last day to order Horns for this batch guys, the following batch will be in July.

 

All emblems have been sent to the proper shops for finish treatment.
Will keep posted of the progress.
= ]

-Andres

 

Is it here yet? Where is it? I want it now!

LOL! Looking forward to your next update. Thanks again Andres!