ICON going on!

bjmoose explains caster well here. He talks about the LR UCAs but the theory is the same.
http://www.tacomaworld.com/forum/su...earance-driving-report-light-racing-ucas.html

 

What pin? I had the bolt for the spring pack and the rivet holding in the retainers for the spring pack. I don't have the link right now but I ordered the shims through wheelers, it was the only one that I saw for shims.

Thank you for the info. What size tires you running?

I do not need the extended brake lines. My rear lift is 1.5 " and front is 2.5. There is more than enough brake line for that lift height. If you went with a Dakar or similar rear spring pack I could see where the additional lift would require longer brake lines.

 

I will have to take a pic of mine to show the centering pin that appears to be welded to the leaf pack.

 

Do you have the ICON leaf pack? Mine only has the bolt for centering the spring pack to my original leafs.

 

Yes I have the Icon leaf pack and the pin does not come out. But it is perfectly round on the bottom pics coming

 

Looks like I may have to eat crow on this one. Now that I have my rear driveline within spec I still have the 35-40 mph vibe. Now it does go away in 4wd. Looks like the bushing is my next step. Did you install? If so any advice before ripping my front end apart? Crossing my fingers that this will be my final piece of the puzzle.

 

Here are the pics of the centering pin. It does not come out

 

Mine was similar to that but the bolt is remove able. TOYTEC has a 3 degree shim that has a groove cut into it so you can slide it in. It comes with bolt head extenders I believe so if you did need to shim the pack you could without cutting out your centering pin.

 

I jut looked at every shim Toytec has and could not find one that you speak of. Link me man

 

https://toyteclifts.3dcartstores.com/mobile/Zinc-Rear-Axle-Shims_p_273.html

Here Ya go!

 

Congratulations to the OP for you Icon purchase. A Buddy & I put mine on(thanks again Chris!) and I never looked back!
Icon makes great products & has very good customer service. I'd also like to state that the folks at Wheelers are extremely pleasant to deal with.

 

Problem solved by YotaDan after you release the top nut and loosens the leafs which in turn loosens the pins. Thanks bro for the link

 

No worries!! Glad it worked out

 

285/75/16 BFG TA KO2 on TRD Fakelocks

 

I had a friend help me out at the dealership he has done a few of them.. Another co member borrowed my removal tool and all went well..He had a little trouble getting his cv back in.. Sorry I couldnt be more help

 

No worries, I greatly appreciate the assist. Looks like that is the route I am going to have to take. I will have a couple of friends to help me out so that will hopefully make it easier.Reading the link you sent It does sound like this has been a pretty reliable resolution.

 

Thanks, I am very happy with the ICON's and with YOTADAN and Wheelers!!!

 

Having your friends help should make it go real smooth.... Good luck and keep us updated hopefully this cures your vibe..

 

Thanks, I hope so. I will keep updating as I make changes, I just ordered the ECGS bushing and will report that it cured my vibes after I install (trying to be positive). I will be out of town for the next couple of weeks starting Monday so hopefully I will be able to get it installed when I return.

On a positive note, I should be getting my wheels this Thursday/Friday. I cant wait!!!

 

Barge should be here tonight, get my rims tomorrow after work and mount/balance with alignment on Friday!!!!!