SCS Stealth 6 wheels 16x8 & 17x8.5

Updated
Extra 1/4" spacers added
Caps on and Cleaned

 

VIN do you have any pics of my Blue Ribbon wrapped in the new dark bronze?

 

Sorry Justin, but I don't have any. We haven't received a lot of photos with matte dark bronze since it's still fairly new.

 

Decided to change the color of my Stealth 6s today...







Still one of the best looking wheels out there, IMHO.

 

Spacers?
For the wheels or Lift?

 

May have a set of matte silver used stealth 6s possibly for sale after this weekend. They are used, and look good. There is a little rash on one wheel. Switched to a gunmetal set. Pm me if your interested. I know a few people were looking for some.

-Jon

 

Booooommmmm got em mounted up and on the truck

 

Very sweet Justin! The truck looks a lot better now.

 

Looks awesome, what size rims 16 or 17 are you running. what tires, size are you running (any rubbing).

 

Stealth 6 only come in 17

 

How many people are running spacers with these? I'd like to see a few more pictures. I noticed a few people are, what are your reasonings besides width. I wouldn't mind the tires sticking out no more than 2 inches. My Frontier's mid traveled set-up was 4 inches wider over stock in the front, and that was too much.

 

17's and Cooper Discoverer AT3's P285 70 17
I def have rubbing, but am also running spacers in the front. I have already done the CMC but will need to cut more to keep them from scrubbing at full lock. It's worth it though.

 

Mine is strictly for looks and width. I am running 1.25" spacers on mine.

 

Finally got them on vin . Me leaving 4wp. Will post more pics later on.

 

For the Lift. Have 5100 with 883, so added Wheelers Poly 3/8" on Driver and 1/4" on Passenger Side.

 

Mounted same day I got them. Crappy phone pic. 265/70R17 Dynapro ATm.
Thanks a lot Vin!

 

I know this has been brought up many times, but I'm in dire need of direction. I came across a good deal on st maxx from discount tire's ebay store and want to jump on new rubber. My ordeal is that I'm undecided between 275/70/17 and 285. I don't mind cutting plastic, but don't want to do CMC. I know there are a lot of factors to take into consideration, but I've just about fried myself trying to figure out what would look best. It is my DD and the suspension wont see much flex. OME 3" will be installed with dakars in the rear.

I know the 275 should clear with little or no rubbing, but I'm concerned that it'll look small in the well. Any insight is appreciated.

 

FINALLY. Looking good Cody! I thought you were going with the TRD center caps.

Show off your Tacoma in the white Tacoma thread! White is always so clean.

If you're totally against doing the CMC, stick with 275s and try to max out your caster setting.

Here's a setup with 275s on a 2.5-3" lift. I think it looks pretty damn good.

 

If you're totally against doing the CMC, stick with 275s and try to max out your caster setting.

Here's a setup with 275s on a 2.5-3" lift. I think it looks pretty damn good.

[/QUOTE]


I agree, that does look good. I was worried they would look small, but they actually look great. Thanks Vin.