PrInSu Design Studio Roof Racks BS Thread

Thanks

 

Front Runner makes an accessory for their racks that would work on Zach's with the HD bars. Check the link below....

http://www.frontrunneroutfitters.co...e-under-rack-storage-slides.html#.VPkGP-nnaUk
.
.
.

 

I was trying to imagine what you'd store under the rack, and there's the answer. Too bad the table that it's designed for costs $300.

If I could find a similar table that would fit I would consider doing this.

 

If Zach can modify the rack for OZ, then he could also do it for Blackout14 which would allow for more space and a cheaper table.
.
.
.

 

Im not sure that you have to use there table. I would table bracket holder and see if you couldn't find a table that would work and not break the bank.

 

I have the prinsu rack and can't picture how you would use this to hold a table to remove from the side.
It would have to be from the rear only?

 

would def have to be from the rear. Is your rack slotted on the bottom?

 

Slotted?

It has slots that bolts can be run thru, just like the top of these cross bars

 

If you can find a Honda CRV in a salvage yard look in the rear for a folding table

You can get them cheap 20-30.00

 

Biggest issue would be fitting the table under there. You really only have about 1" of space to work with. That has got to be a pretty slim table. I think the front runner racks must be a little higher off the roof.

 

This is the cheap camp table that i have. It is sick and folds completely flat. I got mine at academy but apparently they have em at walmart too. Great tables.





http://www.walmart.com/ip/16537239?...68080432&wl4=&wl5=pla&wl6=78910608152&veh=sem

I got some aluminum sheet metal to make a hinged camp table to add on to the inside of the spare tire swing out that will fold down once open to make an L shape with my tailgate. The little aluminum table is great though because its portable. I can put it by my camp chair while I'm hanging around the camp fire.

 

Yeah considering the similarities in extruded aluminum crossbars alot of things will transfer directly over. The thing that holds up my accessories is the fact that I don't want to create something that already exists just so I can have my version. I want something new that either does it better, reduces cost, or serves more than one purpose.

 

Hi Zach, any word on the copper colored hardware???

 

Sent you an email the other day. Still working on the best option. I haven't been totally satisfied with powdercoating so I am looking at some anodizing and other paint options.

 

Sub'd for possible future buy

 

My Prinsu whistled at +65 mph. Annoying. Per Zach's recommendation, I moved the wind deflector down to the lowermost position. Problem solved.

 

Light bar or no light bar? How is it at 80+?

 

No light bar. Not worried about 80+...drive like an old lady.

 

Come to TX. We have 80 mph speed limits.

 

I was thinking of having the slots on the bottom, but turning two upside down is a much less expensive solution.
.
.
.