back seems low

I recently had a 3" rough country lift installed on my 2014 tacoma. Is it me or does the back sit a bit lower than the front. What's the remedy for this?

 

It does a little. Take measurements and confirm. The front may settle a bit.

 

I hope it does. I spoke to rough country. They sell a 3” block for $40. The stock rear block is 2”. It’s only noticeable to me my family says.

 

Nah its definitely low in the back

 

Nah just park across the street bro. It’ll look perfect

 

I’m gonna drive it for a couple of weeks. If the front doesn’t settle a bit I might get the 3” block installed. I can’t stand the bro lean.

 

A lot of leveling kits do this because the

$90 2005-2015 Toyota Tacoma With 4L Right Petrol intake air snorkel kit high performance system compatible kit Replacement black Rotational Molding (2005-2015)

2005-2015's sat an inch lower in the front, so all the "level" kits sit 1" too high in the front.

You need 2" block in rear.

 

He has 2 inch blocks in the rear.

 

OK everyone so this is what I did. The 3" rough country lift/leveling kit comes with a 2" rear block. I bought a 3" rear block off Amazon for $40. Rough country sells the block for the same price but amazon was able to get it to me quicker. You will also need longer u-bolts which are also $40.

I had the 3" block installed and it looks 100 times better. It actually leveled my truck. This lift might have a different result on other trucks but if you have a 2014 tacoma TRD sport it will have a 1"rear bro lean.

 

could be worse...

 

FUNNY SHIT!