blulogic right speaker problems

Hey all,

Recently I've been experiencing a strange occurrence when using my blulogic handsfree.

When I get in the taco and start it up, the phone automatically pairs as usual and I hear the typical beep. Lately though, when that happens, the right speaker makes a snap. When I make or receive a call the left speaker has quite a bit of static. Also, when I stream music I also hear static from the right speaker.

The problem only occurs when attempting to transmit sound (phone or music) from the blulogic device. When playing the radio/cd/aux all is well.

I removed the headunit and verified all the connectors on the HU and blulogic controller are properly seating but nothing was out of the ordinary.

Has anyone ever experienced this? It drives me crazy.

 

bump

 

how did you make your connections? if they aren't soldered, i would suggest trying that. if you're still having problems after that, try a real handsfree kit like parrot.

 

The connections are made as per the installation instructions. The wiring harness is complete therefore, no splicing or soldering connections.

 

anyone else?

 

bump

 

just to update, I determined the noise is not related to the phone/pairing.

With no devices pairs to the blu logic, I hit the button on the dash and still get the snap when the beep comes through the speakers.

I've played with the harness on both ends to see if it's a poor connection which does nothing. I've also removed the blu logic controller and disassembled it to look for any loose/broken connection inside, but couldn't see anything.

 

If its the right front speaker that is by the module. Could be feedback if the module is supposed to ground to the chassis. Just a thought. Not too familiar with the system.

 

Yes it is the speake by the module. Is the grounding something I could do or should that have been taking care of through the wiring harness?