Dakar +/0/- codes

Can anyone confirm what the +/0/- coding is on the Dakar leaf pack (on the front of the leaf spring)?

I think + means above OME spec, 0 is at spec, and - is below spec.

The reason I ask is my leaf packs are coded differently (one is + and the other is 0). I'm thinking I can put the + on the driver's side to reduce the gas tank lean.

 

Subd.


Will need to know also when I go to put my Dakars in.

Sweet ass kit OP

 

Correct

 

I 2nd that, I believe you are correct OP.

 

OP is correct. The + goes on the driver side.

Keep in mind. I have + on my driver side, - on my passenger side, and I still lean. Also have the OME "Trim packer" on the driver side. Still leans.

 

Thanks all.

Right now I'm at 20.5" ds/21" ps on the stock 2+1 non tsb leafs.

Thinking I'll pull the 3rd leaf to keep the lift closer to 2" on my dcsb with a shell, carpet kit and and 150lbs of gear. Might run the full pack for a month or so to see how it settles first.

 

Thanks man.

First I was going to go with 5100s.

Then I researched and thought 5100/885 with an aal.

Then I got sick and put it all on hold.

18 months later I decided to pull the trigger and started shopping again.

I was set on the icons with a wheelers 5 leaf pack. But after more research decided I wanted a progressive shock.

That led me to the fox. Headstrong had attractive pricing on the full setup with the dakars so I figured I'd better pull the trigger before I changed my mind again.

 

Can't wait to hear about how it rides!!!

 

I ended up with the same using '+' on driver's and '0' on passenger's.

In fact I have the same FOX 2.5 coil overs for the front but non-reservoir 2.0 in the rear, so my lift is very similar to the OP. Running Camburg B/J upper arms instead.