H.i.d. Help

Bout the xnenon hids from the gb from slimcubby and the right side is fine its just the left side seems like something is cutting the light off. Any suggestions =/

 

Most likely not getting ground good.

 

the left side beam is supposed to be a little lower and cutoff. So you dont blind oncoming traffic.

Thats just how good headlight housings are designed.

 

if your battery isnt sending enough juice to your HID's, this will cause one or both of your lights to cut out. Is your light cutting out while you are driving, or just when you start your truck?

 

we just had the shields in upside down sorry for the inconvinece but thanks for all your help they work perfect now! =]

 

i'm only getting the light in the top half of the lens on low beam and then on high beam i'm getting the top half plus a little more.. is that right?

 

That's correct. That's how they are designed.

The reflection off the top of the inter housing will reflect the light downward - not blinding people. If the bottom of the housing would get lit up, it would reflect the light up at the sky/oncoming traffic.

 

oh ok cool.. jsut making sure im getting the best of my lights