Lift not level

I am new to wheelin' and I am just getting started on my "build" I need new tires now and plan on 33" but cannot afford a full suspension lift. I would like to use a cheaper spacer type lift as a temporary "fix" until I can afford a better lift. My issue is that I have a topper and with the stock suspension, my truck is level. I know I can get the 3" in front, but how do I get a full 3-4" in the rear?

 

Save your money

 

oh OZ you're such a pessimist!

you can get a new leaf pack buy you're obviously wanting to take the cheap route which I would have to agree with OZ here, save your cash but if you want to slap the cheapest piece of junk underneath your truck get a 3" block lift in the rear.

but I wouldn't.

 

But I need new tires now and I will not get 33" on without some type of lift.

 

look at the pics i put on my last post, its a 3in spacer with 32s. i 1.5in AAL in the rear will do

 

Why do you need 3-4 in the rear? 2" add-a-leaf will be more than adequate for 33's with a shell. 85 bucks from toytec.com http://toyteclifts.3dcartstores.com/Rear-ToyTec-Add-A-Leafs_p_10.html

Edit: Spacers are all bad in the rear on these trucks. They have axle wrap/driveline vibration issues on stock suspension and blocks make them much worse. Add-a-leafs are so much better for not much more price.

 

I bought a pair of these in the past but never used them due to deciding to buy new shocks instead.

Hell Bent Steel Toyota Tacoma 2.5" Steel Fabricated Leveling/Lift Kits (PN:420-250-001)

http://www.amazon.com/Hell-Bent-Steel-Fabricated-Leveling/dp/B0085XNYFW/ref=cm_cr_pr_product_top

I will be putting them up for sale soon but PM me if you want them.