Lug Question

Got a '22 SR with stock steelies. Swapping out to OEM alloys off the SX package. I need to swap out the stock acorn lugs with flat seat lugs.

Stock numbers for factory lugs are all over the place. Aftermarket have multiple sizes....tall vs short.

My dealer gave me this stock number 90084-94001. Here's the wheel I'm going with and a pic of the lugs I found.

Will these work?

 

Yeah, I just grabbed that pic for verification. I didn't order them yet. Just wanted to make they're the right ones first.

 

Thanks for the quick replies guys!

 

Did those lugs work out fine for you? I talked to toyota and they gave me part number 90942a1005 for lugs for the 2021 sx wheels and they are crazy expensive ($350 for 24) so f that.

thanks!

 

FWIW there must be two different sets of lug nuts for these trucks for the 3rd Generation.

I was looking back through my old photos and when I had my 2013 I had OEM TRD Off-Road wheels / lugs and they were short as shown in the above photo. The lug nuts for my 2016 OR are taller.


What jogged my memory about this was when I purchased wheel locks for my truck. I had originally purchased the short style and realized they did not match my longer lug nuts. As long as you get a matched set with the right seat you're fine, but apparently Toyota played around with lug nut design between the generations.