Milehightaco's build "Roxy"

So I think tis time to start a build not new to Toyota I had a 2000 4runner with a 3 inch suspension lift and 2 inch body life that I wheeled. Now I have a 2008 speedway blue double cab long bed. Got her in July of last year with 74,500 on her. Here it as close to when I got as I have. It had I 1.5 inch front lift to level it out. I got 17x9 -12mm offset XDs with 285/70/17 on it after I got it and drove it like this for a few months. Also have 1.25 wheel spacers.

 

Then I decided I want to lift her. So I when with a rough country 6 inch lift because one it cheaper then the others so I could later change out shocks and all at different time and not have spent 2500 or more on the lift. Also doesn't drop as far down as other drop bracket lift so giving up all my ground clearance. So here is after the lift.

 

Then in feb. of this year a mustang ran a red light and I was turning left little damage to truck. The bumper, fender, grille, and heads only thing damaged but the mustang was totaled. Picture of both














Everyone was ok and walked away from it.

 

After the crush I got a ARB bumper don't pictures of it but from this last Saturday on the trail that I broke a front shock, over extended a rear shock and twisted the rear driveshaft. So I got two new front shocks for now and two new rear shocks just cheap ones and got the rear driveshaft re-tubed with .120 wall dom tube and new carrier bearing. I had to take the driveshaft off on the trail and had a long drive back home.

 

damn sorry to hear about your crash. looks like the stang took most of the damage there. anyway i love your wheels man. i'm thinking about getting ones in 16".

 

So Havnt been on in a some time so here so here are some updated pics of the truck with 37s on it and some wheeling pics from some trips.