Need help guys.

Alright, i know people will probably bash me for what im about to say, because i know you guys here don't like it. But please keep the negative comments to yourself, and leave only helpful advice. Im wanting to lift my taco just a little bit. I want to fit a 275/70/17, possibly 285. But, heres where you might not like it, i want a slight bro lean. I want it to be just enough to be noticeable, but nothing drastic. Any information would help, like kits that would cause this. Thanks everyone.

 

Come on guys....i really need the help!

 

5100's up front, 1" block for the rear. crank the billies until you get desired bro lean. 285's will be tight in the rear.

 

Ome 90000 with 886 springs should give you about 2-2.5" lift in the front add a leaf in the rear and for 285 probably 1" wheel spacers

 

Will I Have To Trim For 285

 

I think so but not 100% sure I know you will rub when turning especially without the wheelspacers

 

With 285's you'll most likely have to do a cab mount chop and spacers or aftermarket wheels with the right back spacing. I have the toytec 3" lift and had to do a cab mount chop. I also have Light Racing UCA's and my stock offroad wheels on 285's rub the UCA in reverse at full turn.

 

Does yours have a rake, bro lean, or sit level?

 

You will more than likely have to do the cab mount chop because the lean is going to bring the cab mount closer to the tire. Guys are having to do the chop on a full 3" lift and sitting level.

 

I have a 3" spacer in the front which gives the truck a bro-lean to it. Stock in the back. Truck is an 08' TRD O/R with rugged trail package. There's approx 1" difference between the front and the rear.

I'll soon be leveling it out with an AAL or a block, unsure yet.

**edit: I also run 285/75/16 BFG A/Ts and had to trim some of the plastic off the inner front flares, no more scrubbing at full lock.

Here's a picture for you to see.

 

What kind of spacer do you have?

 

PM'd you it. and PM replied.

 

i have the bilsteins set at 2.5 up front and 5100 in the rear as well slight bro lean but nothing crazy i just bought 285/70/r17 and i think they look great and no rubbing so far.

 

also the offset on my rims are probably a big reason why there's no rub i did have to take of the little front mud flap though.

 

What rims do you have and whats the offset and backspacing of them?

 

i got the new rockstar II's and i have to call to ask about they backspacing they said something about a 12 offset but im not very experienced with rims and tires i just made sure to ask for ones that would fit without rubbing and thats what they came up with.

 

Probably 4-4.5"

 

Mine are -12mm offset with 4.53 backspacing. Will this fit with 285/70/17 with a 3" readylift front spacer?

 

Mine sits level at 3" but in order to fit bigger tires you'll have to do the cab mount chop. You may be able to fit 32's without doing the cab mount chop but not sure.

 

Luco u should be able to that's wat I have and I have the bilstein's set at 2.5