Remote starter

Hello all. I recently installed a remote starter on my 2015 Tacoma. I've had no issues however my lock and unlock feature does not flash the lights or give a chirp acknowledgement. I would like the remote start to function as is but the unlock and lock features as I had when it when it was factory. Also I've attached the wiring list of wires I have available and polarity of those wires. If you have any questions please let me know and thank you for any help in this matter.

 

you cant get the same chirps as the factory remote.
if you want a confirmation chirp you would have to hook up horn(if your remote starter has the output). As for the light flash you would also have to hook it up.

 

I do have the factory horn connected and I figured out the settings for that. As for the lights I have one parking lights connection and another optional parking lights connection. I'm just not sure which wire to connect them to for the daytime running lights which also act as the lock and unlock acknowledgement lights

 

you could use + or - parklight it should flash when you hit lock n unlock. what starter did you install?

 

Crimestopper rs7g5. And I did connect to the parking lights but no flash

 

never heard of that brand. I usually install compustar, viper and dei products and they always flash the parklight with lock and unlock.
I looked at the install guide for your starter the parklight has an input wire so if your using positive parklight on the vehicle you would connect red/blk from brain to constant. and if using a negative parkilight connect red/blk to ground.
also on the option programming I saw parklight option for unlock only..

 

Mainly I installed it because half of the connections are sold as plug and play into the ignition plug. I haven't had any issues as far as starting the vehicle which is the main purpose of it but I will dig around with the info you've provided. Thank you.

 

yeah no problem.