Right pull and vibration

I have a decent right pull and light vibration between 45 and 60mph. It's a 2014 dbsb 4.0 4x4 on wildpeak at3 285/75/16 with 3inch bilstien 5100s all around, ome coils and an add a leaf in the rear. The shop has aligned it multiple times and state its aligned properly but still pulls more than I would like. I asked about getting new ucas for more adjustment room but told it wasn't necessary. Thoughts?

Second issue with vibration, could it be the needle bearing?

 

Pull could be a few things, tire pressures? road camber? brake pull?
I have to say that after multiple alignments i really hope they did not miss anything loose/broken/failing/out of wack on the front end.
Vibration, balance, bad tire.

 

Maybe try rotating the tires around and see if anything changes.

 

Do this^^^^ if you swap the two front tires side to side and the pull stays the same it’s not the tires.. if it pulls left it’s the tires.