What have you done to your Tacoma today? 1st Gen Edition

Oh. Yeah it would single click sometimes.
Since the rebuild it starts but is weak.
Well... guess it's time to pull the battery and get it load tested.

Good to know the bigger one is for cold weather. Thought it was odd it's bigger. I mean the small one is factory but I do go into the cold periodically.

 

No idea

 

Yes, I have the methanol, I have a 2nd map that will work on a switch for the methanol in summer on the fly, but not tuned yet for that tho,

The methanol switch is by the scangauge on the right

 

Wow. I'd check your plugs and coils and air filter. Basic maintenance stuff. My extended cab could get 20+ on the highway BELOW 70mph.

 

Ballin!!!!

 

Check your ground straps and battery cables

 

The only parts that haven't been touched on this truck are the engine and transmission internals.... and wheel bearings

I gave up a long time ago. All but convinced it must be a timing thing.

 

I've gotten over 20 in my double cab even fully loaded with 33s..

 

Yea, 14 mpg! there’s something not right there

 

Open to out of the box ideas, but AFR is where it's supposed to be, plugs have been replaced and re-gapped at least 4 times, head was ported/polished when I did the head gasket, and replaced valve stem seals with viton.
Could be a shim issue I suppose. I've never done a compression test.

 

In your situation it’s probably because it’s turbo,

A turbocharged engine turns into a fuel-hog under hard acceleration, because the large volume of air being pumped into the cylinders must be matched by a larger volume of fuel. Explaining the abnormally high consumption of a turbocharged engine under high load

 

Existed well before the turbo, and still present when I drive "softly"

ECU still auto-corrects to 14.7 in boost unless WOT, as a reminder

 

Looks like there are two in there, I should break one open.

Could have built it I suppose, but these aren’t expensive and time is

 

I need details! Might have to drop my tax return on this.

 

These are Corbeau Trail cats, my initial thoughts are really good. They are t overly stiff. It will know more in a week or so when I get them in. I added tge lumbar support abs seat heater options. As well as the bolt in brackets

 

Done! Next step is to get this off to powder coat. While I wait.. finally get to fitting them 35’s…

 

Truck’s bad as fuck.

 

Thank you sir!

So many projects… so little time. Looking at these pictures, I think I need to cut down my over the shell rack a few inches.. looks a little big here.

 

Love the rum ham sticker

 

Assumed that some of them were from here. Saw your rig up chocolate thunder earlier in the day. Truck looks good!