Will this rim/lift kit work?

I ordered a 20x10 -19 fuel assaults with a 6 inch bds suspension lift along with the upper control arm kit. Will this rim size work with this kit? If not will I just have to add spacers? Plz help

 

should work just fine. What exactly are you worried about? Research, research...Research. welcome!

 

I am mostly worried about rubbing on the inner components!

 

Its a pretty wide wheel with decent offset.

There's a good thread on here for these lifts I'm trying to find it.

 

the tire rubbing stuff? Like suspension parts or the frame where the cab mounts or the fender or everything? Lol

 

Anything that really can't be trimmed lol

I am stuck with the rim/tire and lift combo too late to back out now lol

 

I hear that, you spent some coin!! Things can be trimmed if they rub the tire.

 

BDS says they need 4.5" max backspacing: https://bds-suspension.com/product?ma=12&mo=45&ty=1&yr=2005-2015

The wheels you ordered have 4.75" backspacing: http://www.fueloffroad.com/wheel/5680/fuel-1-piece-wheels-assault-d546/?finishID=258&lugs=6
So yes, you will likely need a minimum of 1/4" thick spacers in the front to clear the BDS spindles. You'll need extended thread conical seat lugnuts to use the spacers.

 

​