![iCrimp Crimper Tools for Delphi APTIV Packard [Weather] [Pack] Terminals Metri-[Pack] Connectors for Sealed Terminals](https://images-na.ssl-images-amazon.com/images/I/51K1x004b5L._AC_UL160_SR160,160_.jpg)
I am wiring a dune buggy using a PAINLESS wiring kit. I needed this crimping tool to assemble WEATHERPACK and PACKARD 56 connectors using 14, 16, & 18 gauge wire.
The crimping tool arrived as promised. The tool is well made and the crimping dies mate perfectly.
I tried a test crimp using the same wire as on my project. It came out 99% perfect so I decided to use it on the buggy. I say 99% because the largest die was a little small for the seal crimp - but still acceptable.
In the past I have used a standard crimp tool and needle nose pliers to crimp these terminals which would create a sloppy and distorted crimp. With this tool crimping is a breeze. The actual crimp is a 2-step process that takes about a minute from stripping the wire to completing the second crimp. Here is the process I use:
1. Install the WEATHER PACK seal on the wire.
2. Strip the wire insulation back 3/16 of an inch.
3. Position the terminal on the wire/seal assembly. (I "tweak" the tabs in the terminal together a little bit to better fit in the dies)
4. I used the "14 - 18" die section for the seal. Position the seal in the die section with the tabs toward the "W" side of the die and preform the crimp.
5. Move the terminal to the "14- 16" die section and crimp the wires to the terminal. The tool is wide enough to crimp both sets of wire tabs.
You'r done!
I wish I had bought this tool earlier,it works great and I would recommend it.
| Manufacturer | Performance Plus Connection |
|---|---|
| Brand | Performance Plus Connection |
| Item Weight | 11.2 ounces |
| Product Dimensions | 10 x 2 x 8 inches |
| Item model number | WHP T-11 |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | WHP T-11 |
