Customers also search

Page 1 of 1Page 1 of 1

WARNING: California’s Proposition 65

From the manufacturer

Plasti Dip Spray, the original multi-purpose rubber coating that is removable from most smooth surfaces.


Plasti Dip is an air-dry, specialty rubber coating. In fact, it’s the original peelable, flexible, insulating, non-slip, durable rubber coating.	Plasti Dip multi-purpose coating is ideal for a broad array of do-it-yourself projects around the home, garage, garden, and elsewhere. With so many colors, your craft and DIY possibilities are endless!	Protects coated items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. Remains flexible and stretchy over time and will not crack or become brittle in extreme weather conditions. Proven in temperatures from -30°F to 200°F Peelable and removable off of most surfaces.	Always protect surrounding areas from overspray. Allow 4 hours per coat for complete dry. If runs or sags are experienced, move can further away from surface. To avoid clogged nozzle, turn can upside down and spray for 5 seconds. If clogged, remove nozzle and soak in naphtha or mineral spirits for 30 minutes. Do not stick pin or other objects into stem. Use naphtha, xylene (xylol), or toluene (toluol) for cleanup. To greatly increase non-skid properties, sprinkle a generous amount of grit onto wet surface of first coat. Apply at least two additional coats of Plasti Dip. For best results, use a pumice (crystalline silica) grit. Results may vary with other grit additives. When applied properly Plasti Dip can be removed from most surfaces, if desired.

Product Description

Plastic Dip is an air-dry, specialty rubber coating. In fact, it’s the original peelable, flexible, insulating, non-slip, durable rubber coating. The Plastic Dip product line provides a wide range of coating solutions from automotive customization to home improvement. With over 50 colors and enhancers of Plastic Dip, including a Create Your Color Kit, the possibilities are endless!

Product information

Technical Details

Manufacturer

‎Performix

Brand

‎Plasti Dip

Model

‎Matte Black 11oz Aerosol Can

Item Weight

‎14.1 ounces

Product Dimensions

‎2.6 x 2.6 x 8 inches

Item model number

‎11203

Is Discontinued By Manufacturer

‎No

Exterior

‎Plastic,Rubber

Manufacturer Part Number

‎11203

OEM Part Number

‎11203

Special Features

‎Washable

Additional Information

ASIN

B0006SU3QW

Customer Reviews

4.6 12,040 ratings

4.6 out of 5 stars

Best Sellers Rank

#8,094 in Automotive (See Top 100 in Automotive)
#4 in Automotive Top Coats

Date First Available

May 5, 2006

Warranty & Support

Amazon.com Return Policy:Amazon.com Voluntary 30-Day Return Guarantee: You can return many items you have purchased within 30 days following delivery of the item to you. Our Voluntary 30-Day Return Guarantee does not affect your legal right of withdrawal in any way. You can find out more about the exceptions and conditions here.

Feedback

Would you like to tell us about a lower price?

What's in the box

Aerosol Can

Looking for specific info?

Customer reviews

4.6 out of 5

12,040 global ratings

How customer reviews and ratings work

Customers say

Customers like the drying time, value, and ease of use of the auto accessory. They mention that it dries fast, has a bit of a rubberized texture, and is good value for the money saved on a new paint job. They are also satisfied with quality, and appearance. However, some disagree on spray quality, texture, ease of removal.

AI-generated from the text of customer reviews

975 customers mention895 positive80 negative

Customers are satisfied with the quality of the auto accessory. They mention that it's fantastic, works well, and is amazing. Some say that it holds up well so far and is a really forgiving product.

"Easy to use and work great." Read more

"...I could remove all of it after some work.Overall this product is fantastic...." Read more

"Great stuff!" Read more

"This stuff is amazing! The more I use it, the more I'm convinced this stuff is ALIEN technology! This stuff had to come from area 51. Seriously!..." Read more

342 customers mention310 positive32 negative

Customers are satisfied with the appearance of the auto accessory. They say that it changes the look of their car completely, and the matte effect is sexy and amazing. They also mention that the black wheels look really sharp on their black car, and that it matches the factory plastic perfectly. Customers also say that thicker coats look better and are easier to peel off. They mention that it gives glossy surfaces a matte finish.

"...stripes, no problem, mask them off and peel the tape while still wet, crisp, clean line almost every time! You want a little shine to it?..." Read more

"...the five coats to the two step bars and the antenna, I got a smooth surface finish that rivals anything from a factory. I used 2 cans for this...." Read more

"...I haven’t had them on my rims very long, but that’s far they look very cool. A few tips;..." Read more

"...It's also supposed to give glossy surfaces a matte finish and have seen nice results online of that...." Read more

293 customers mention280 positive13 negative

Customers find the auto accessory easy to work with, apply, and touch up. They say the cans spray well and are easy to control. They mention it goes on nicely and adds a slight texture and a rubberized feel to small surfaces. They also say the spray nozzle is easy to make precise sprays. However, some customers mention that surface prep is critical and the key to longevity.

"Easy to use and work great." Read more

"...The cans spray well and are easy to control. Prep to your level of comfort.I applied a single coat of gray Rustoleum metal primer next...." Read more

"...Seriously, this stuff is really cool and applications is easy and really forgiving...." Read more

"...used this Plasti Dip for two purposes so far, and I am very happy with ease of use and results for both applications...." Read more

139 customers mention103 positive36 negative

Customers like the value of the auto accessory. They say it's easy to use, well worth the money saved on a new paint job, and an inexpensive solution to an ugly problem. Some say it’s a cost effective way to extend the life of a pair that look dirty.

"...pack because I wasn't sure how much I was going to need and the price was unbeatable.1...." Read more

"...a product to make my car look better and expensive but with a minimal cost...." Read more

"...It just arrived, I was sadly mistaken as there was only 1 can for twice the price...." Read more

"Worth purchasing. I was able to do it on my own...." Read more

77 customers mention65 positive12 negative

Customers like the drying time of the auto accessory. They mention it's easy to use, and it dries fast. They also say it has a bit of a rubberized texture, and that it flies strongly against rain, dirt, and snow.

"Liked its fast drying time. Great aerosol can to dispense it with. No brushes required to be cleaned. I've ordered two more cans!" Read more

"...You can put this stuff down wet and it will dry to a smooth matte finish...." Read more

"...a few hours before the chemical smell was gone and the handles felt dry to the touch.Yes, grip was immediately improved...." Read more

"...It went on very easy, waiting about 10 minutes between coats, and dries really fast...." Read more

192 customers mention105 positive87 negative

Customers are mixed about the ease of removal. Some mention that it's very easy to peel off, while others say that it peels off too easily, is sticky, and hard to peel away in one piece.

"...the glossier the surface the better. It peels way better off of glossy surfaces but the stuff is very tuff! You have to WANT to peel it off!..." Read more

"...It sticks to the surface well and took effort to pull off. I could remove all of it after some work.Overall this product is fantastic...." Read more

"...The peel off was perfect. Very little effort and wallah, mat black on the pieces I wanted black...." Read more

"...This afforded enough purchase that the coating started peeling away in that area...." Read more

130 customers mention65 positive65 negative

Customers are mixed about the spray quality of the auto accessory. Some mention that the cans spray well and are easy to control. They say it sprays on evenly, while others say that it didn't spray properly and went all over the place.

"...The cans spray well and are easy to control. Prep to your level of comfort.I applied a single coat of gray Rustoleum metal primer next...." Read more

"...second coat "bubbled" a lot as I applied it and did not go on nearly as smooth and I didn't know why...." Read more

"Liked its fast drying time. Great aerosol can to dispense it with. No brushes required to be cleaned. I've ordered two more cans!" Read more

"...The aerosol can is not designed to spray items laying in a horizontal position...." Read more

63 customers mention32 positive31 negative

Customers have mixed opinions about the texture of the auto accessory. Some find the coating substantial and smooth, while others say it results in a rough texture surface.

"...It went on nicely and added a slight texture and a rubberized feel to the case...." Read more

"...You want a little shine to it? hit it with the glossifier, not super slick but semi gloss easy. Change your mind?..." Read more

"...you get a nice texture and finish to seal them up and they're paintable...." Read more

"...remote control and found that the back of the remote is VERY smooth, too smooth...." Read more

Reviews with images

See all photos

Sort reviews by

Top reviews from the United States

There was a problem filtering reviews right now. Please try again later.

rick sloan

Amazing stuff!

Reviewed in the United States on April 22, 2014

Size: 11 Ounce (Pack of 1)Color: RedVerified Purchase

This stuff is amazing! The more I use it, the more I'm convinced this stuff is ALIEN technology! This stuff had to come from area 51. Seriously! Rubber spray paint that you can peel off! You can put this stuff down wet and it will dry to a smooth matte finish. You want stripes, no problem, mask them off and peel the tape while still wet, crisp, clean line almost every time! You want a little shine to it? hit it with the glossifier, not super slick but semi gloss easy. Change your mind? Peel that s*** off and do it again! At around $6 a can, who cares!
Seriously, this stuff is really cool and applications is easy and really forgiving. Spray paint is too easy to screw up, prep is everything with lacquers and enamels. You spray one of those wrong and you've go a messy cleanup to get back to ready. This stuff doesn't even need scuffing, just degrease and spray. the glossier the surface the better. It peels way better off of glossy surfaces but the stuff is very tuff! You have to WANT to peel it off! A little more time with the alien ship should give them the formula for high gloss and we will be set! A monkey could paint with this stuff! He might have trouble laying out stripes but come on he is a monkey! I learned from another monkey to always wear respiratory gear when working in tight spaces cause your stripes might be a little crooked and squirrely if you dont!.
Allow 30 minutes to recoat and have fun! This stuff aint expensive or permanent.
Got a car, got a bike? Dip'em, dip'em hard and dip 'em wet! Hell they sell the stuff in gallons, imma gonna dip my houseboat! And at the same time stop leaks! Hell I might even try to dip my pool, water tight and algae free.
It's perfectly safe on your new ride as well, paint a clear nose protector to protect from rock chips!
Hell, dip that ride and rob a bank! Cruise a few mile away and peel that s***! That is a joke of course, you steal a car to robe a bank then drive to you dipped car and the peel it elsewhere! Like in the cannonball run!
I would never do any of that s*** but I did plasti dip my bike and it looks awesome!! On a serious note to Performix. bribe that ALIEN and get the gloss formula! Iv'e got many plans for this stuff! Oh, sorry --- Blah, Blah, Blah, good stuff, buy it!

12 people found this helpful

Helpful

J

Awesome product

Reviewed in the United States on April 5, 2019

Size: 11 Ounce (Pack of 1)Color: BlackVerified Purchase

Easy to use and works great.

If you have never spray painted anything before, you're best off practicing painting the box these come in with some cheap spray paint to get a feel for the process. Keep doing it until you can coat the box without any drips or waves.

I took my wheels off and used a jack stand to hold my car. The whole process took about a day per tire so plan ahead. I sprayed my wheels with a hose then scrubbed them with dish soap water and a rag. Then dried with a broken hairdryer and a clean rag on a nice breezy sunny day(s). I buffed the wheel one last time with another clean rag. There is always some film of road grease somewhere so be thorough.

Be prepared with cheap plastic gloves, some painters tape, a sheet of cardboard big enough to lay the tire on, and some cardstock or index cards. You may want a respirator or at least a fan or something too if you have no breeze. The paint makes fumes. 2 hours of prep work will save you 5 hours of backtracking if you mess up later. Take your time.

I first taped index cards around the tire but later found this to be overkill. I am adept at painting and later only needed a single line of painters tape around the tire to sufficiently block the spray. The cans spray well and are easy to control. Prep to your level of comfort.

I applied a single coat of gray Rustoleum metal primer next. This may not be necessary but it didn't hurt.

Now, the cans of black will spray in a vertical line which helps immensely with coverage and control. Put on your gloves and paint the box lightly to get practice with it. The spraying handle is necessary if you want to keep feeling in your hands. Give the wheel about 50% coverage with quick light sprays and let it sit for a while. I gave mine about 20 minutes. Then keep repeating until your wheel is covered. At some point you can just spray it on fairly thick so long as you keep control of the coverage and it will work and look fine. Apply even layers until your whole can runs out and give at least 10 minutes between layers. You get a lot of paint in each can!

Repeat the process with the gloss if you wish.

Out of curiosity I painted an old wheel to see how this stuff holds up. I peeled it off after it dried. It is not unlike a latex glove but much, much stronger. It sticks to the surface well and took effort to pull off. I could remove all of it after some work.

Overall this product is fantastic. Just do your prep work and take your time for the best results. The paint is forgiving and will nearly level itself out but you should still apply it as best as you can.

14 people found this helpful

Helpful

Dotty4

Easy to use

Reviewed in the United States on March 19, 2024

Size: 11 Ounce (Pack of 1)Color: ClearVerified Purchase

Easy to use and work great.

Reviewed in the United States on October 19, 2023

Size: 11 Ounce (Pack of 1)Color: ClearVerified Purchase

Liked its fast drying time. Great aerosol can to dispense it with. No brushes required to be cleaned. I've ordered two more cans!

Reviewed in the United States on March 7, 2024

Size: 11 Ounce (Pack of 1)Color: ClearVerified Purchase

Great stuff!

Helpful

Top reviews from other countries

Translate all reviews to English

NaN tay

Great product

Reviewed in Canada on April 4, 2024

Size: 11 Ounce (Pack of 1)Color: ClearVerified Purchase

Worked perfect

Daniel Roque

Excelente

Reviewed in Mexico on August 30, 2023

Size: 11 Ounce (Pack of 1)Color: BlackVerified Purchase

Muy buen producto

Translate review to English

Jonathan Muñiz

Excelente producto. Fácil de aplicar y con un acabado hermoso si se hace correctamente.

Reviewed in Mexico on December 27, 2021

Size: 11 Ounce (Pack of 1)Color: RedVerified Purchase

Compré una lata de color rojo para pintar la tapa lateral de mi computadora, la cual ya estaba bastante descolorada y rayada.

Ya había intentado usar este producto anteriormente, pero los resultados no fueron los que yo había esperado. La superficie que pinte quedó con una textura gomosa horrible, se le pegaba la pelusa y el polvo, quedaron unas líneas blanquizcas horribles y cuando quise remover el producto fue un verdadero lío ya que no se quitaba tan fácil cómo se mostraba en algunos videos en internet, un verdadero desastre. Lo primero que hice fue culpar al producto pues según yo, había hecho todo de manera correcta. No obstante, después de ver varios tutoriales en Internet de cómo aplicar correctamente este producto, me di cuenta de que había hecho todo de manera incorrecta y que el mal resultado había sido completamente mi culpa.

En este segundo intento puse en práctica todos los consejos y técnicas que vi en Internet para una correcta aplicación de este producto y debo decir que la diferencia de resultados es abismal. Obtuve un acabado completamente liso y suave al tacto sin textura, fácil de limpiar y con un color completamente uniforme.

Si esta es la primera vez que vas a utilizar este producto o si ya lo habías intentado utilizar anteriormente y habías tenido resultados malos como los que yo tuve la primera vez déjame compartir contigo algunos consejos que te ayudarán a evitar cometer los mismos errores que yo cometí al principio y de esta manera obtener un acabado uniforme y sin textura.

Antes que nada, algo que deben de tener muy en cuenta es que este producto NO ES PINTURA, es goma en aerosol y por lo tanto la forma de aplicación no es la misma que se utiliza para una pintura en aerosol. Tanto la distancia como la velocidad y cantidad del producto aplicado difieren totalmente de una pintura normal.

Una queja muy común en este producto es que cuando se está aplicando a veces salpica algunas gotas muy gruesas lo que arruina la uniformidad de la aplicación. Para evitar esta situación debemos de calentar la lata para que el contenido de ésta se disuelva mejor y que al momento de aplicarlo salga un spray fino y con un tamaño de gotas uniforme. La manera correcta de hacer esto es metiendo la lata en un recipiente con agua caliente (OJO el agua debe de estar caliente más no hirviendo ya que si elevamos demasiado la temperatura de la lata esta puede explotar) y dejarlo reposar por unos 15 minutos. POR NADA DEL MUNDO SE TE OCURRA CALENTAR LA LATA DIRECTAMENTE CON FUEGO NI CON UNA PISTOLA DE CALOR, USA ÚNICAMENTE AGUA CALIENTE. Después de sacar la lata del agua debemos asegurarnos de secarla completamente para que no vayan a caer gotas de agua a la superficie sobre la cual vayamos a aplicar el producto.

Antes de empezar a aplicar debes asegurarte de que la superficie a cubrir esté completamente limpia, sin polvo y completamente seca, si vas a aplicarlo sobre tu auto éste debe de estar libre de cera o abrillantador.

La distancia ideal para aplicar el producto es de 15 cm ya que si se aplica el producto de más lejos las gotas del aerosol quedaran demasiado dispersas y al secarse tendrás un acabado texturizado y gomoso que se verá y sentirá horrible al tacto. Por el contrario, si aplicas el producto demasiado cerca tienes el riesgo de que el producto se chorree o que se le hagan costras que al secarse se notaran bastante.

Cuando estes aplicando el producto lo mejor es hacerlo a una velocidad media y en capas de ligeramente gruesas. Como ya lo dije, esto no es pintura y no se puede aplicar a la misma velocidad. Muchas personas tienden a aplicar el aerosol de manera rápida y en capas delgadas, pero si lo haces así corres el riego de texturizar el acabado y terminar con el indeseable acabado gomoso y pegajoso. La mejor forma de darte cuenta si estas haciendo una aplicación correcta es que al aplicar la capa de spray la superficie dónde estás aplicando se verá mojada, brillante, reflejante y sin espacios blancos. A esto se le llama “wet coat” (Para una mejor demostración busca en YouTube el video “DipTips: Spraying PlastiDip Without Texture”)

¿Cuántas capas debes de aplicar? Todo dependerá de tu proyecto, pero recuerda que uno de los beneficios de este producto es poder quitarlo de manera fácil con solo jalarlo y la única forma de lograrlo es tendiendo una capa gruesa de producto. Si dejas una capa muy delgada de producto o no muy gruesa, igual podrás retirar el producto jalándolo, pero en vez de salir en una sola pieza se desprenderá en varios pedacitos y será bastante tedioso y difícil de quitar. Lo recomendable son de 5 a 7 capas gruesas de producto dejando un intervalo de 15 minutos entre cada capa. De preferencia recuerda recalentar la lata con mas agua caliente entre cada aplicación. Después de aplicar la ultima capa deja secar por un periodo de 4-5 horas para que el producto este completamente seco y curado.

Para obtener los mejores resultados procura aplicar el producto en un espacio con buena ventilación, pero donde no haya corrientes de aire pues corres el riesgo de que le caiga polvo a tu superficie o que el aire disperse el aerosol y arruine tu acabado.

Espero que estos consejos te ayuden a conseguir ese hermoso acabado liso y terso que todos queremos y puedas tener un proyecto del cual puedas estar satisfecho.

93 people found this helpful

Translate review to English

Hoggie

Cost could be better

Reviewed in Canada on May 3, 2021

Size: 11 Ounce (Pack of 1)Color: RedVerified Purchase

Works. Produce showed up with a dint in the can not a big deal still works. Little on the pricey side tho.

Alex

Pretty good

Reviewed in Canada on December 20, 2020

Size: 11 Ounce (Pack of 1)Color: BlackVerified Purchase

I bought it for blacking out my car decals and it worked pretty good, just need to practice a bit, my first time didn’t go to well but it just peeled off and I tried again. I would not advise putting high pressure water on it though if it’s going on the outside of a vehicle, it will likely blow off

See more reviews

Image Unavailable

Plasti Dip Plasti Dip11203-6 Black Rubber Coating Spray - 11 oz.

Customers also search

From the manufacturer

Plasti Dip Spray, the original multi-purpose rubber coating that is removable from most smooth surfaces.

Product Description

Product information

Technical Details

Additional Information

Warranty & Support

Feedback

What's in the box

Looking for specific info?