| Manufacturer | Design Engineering |
|---|---|
| Brand | Design Engineering |
| Model | Design Engineering Reflect-A-Gold 12"X24" Sheet |
| Item Weight | 4.6 ounces |
| Item model number | 10392 |
| Is Discontinued By Manufacturer | No |
| Exterior | Design Engineering Reflect-A-Gold 12"X24" Sheet |
| Manufacturer Part Number | 10392 |
| OEM Part Number | 010392 |
| Voltage | 12 Volts |
Frequently bought together
$27.99
Get it May 9 - 13
In Stock
+
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may ship from close to you
Page 1 of 1 Start overPage 1 of 1
From the brand
-
A family-owned US-based manufacturer with over 25 years of experience specializing in the design, production, and distribution of premium heat and sound control products. DEI caters to a diverse range of markets, including automotive, RV, power sports, residential, and marine. Our core focus lies in creating innovative solutions for managing heat and sound, with a commitment to delivering products that meet & exceed the highest quality standards
-
-
-
-
-
-
-
-
-
-
From the manufacturer
Reflect-A-GOLD
Reflect-A-GOLD is an adhesive heat shield made from a metalized polyamide polymer laminated to a light weight glass fiber cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. Our lightweight, adhesive thermal shielding is easily applied and won't lift off. It's minimal clearance and ease of use makes Reflect-A-GOLD a highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms and anything or area that needs protection from heat.
- For firewalls, bulkheads, engine covers, floors, seat bottoms & more
- Handles continuous temps up to 850 degrees F
- Resists UV degradation for long-term performance
- Adhesive protected by release liner rated up to 325°F
- 0.0065" thick
- Easy to apply
|
|
|
|
|
|
|---|---|---|---|---|---|
| Titanium Exhaust Heat Wrap | Fire Sleeve and Tape Kit | Cool-Tube Extreme Heat Reflective Sleeve | Reflect-A-GOLD | Heat Sheath - Aluminized Sleeving | |
|
|
|||||
| Customer Reviews |
1,281
|
353
|
46
|
1,617
|
1,034
|
| Price | $42.48 | $21.29 | — | $3,846.99 | $14.87 |
| Made from pulverized lava rock and engineered for improved thermal performance and reliability | Use for bundling and protecting hoses, electrical wiring, etc. from high temperatures | Ultra-lightweight heat reflective solution for wires, cables, hoses, fuel lines, etc. | Heat reflective solution for firewalls, bulkheads, engine covers, floors, seat bottoms & more | Heat Sheath provides ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Reflect-A-Cool | Titanium Pipe Shield | Versa Shield | Titanium Turbo Shield | Protect-A-Boots and Wires Kit | Hi-Temp Shrink Tubing | |
| Customer Reviews |
419
|
352
|
475
|
119
|
7
|
23
|
| Price | $13.83 | $49.99 | $27.99 | $141.80 | $30.99 | $80.66 |
| Use to cover firewalls, marine engine compartments, RVs, or in the tub of a racecar where typical mechanical fasteners cannot be used | Easy to install with unique rivet-based pipe standoff brackets and pipe clamps | Protect your starters from potential failure caused by under-hood heat soak conditions | Custom fit for easy installation, the incoporated anchoring hooks provide a secure fit | Optimize your under-hood protection against radiant heat while adding a finished look to your spark plug wires | provides excellent electrical insulation, protection, as well as providing strain relief |
Compare with similar items
This Item  Design Engineering 010392 Reflect-A-GOLD High-Temperature Heat Reflective Adhesive Backed Sheet, 12" x 24" Sheet |  |  |  |  |  | |
| Price | -36% $27.99 List: $43.99 | $7.99 | -23% $24.58 List: $31.99 | -25% $32.38 List: $42.99 | -6% $7.49 List: $7.99 | $30.99 |
| Delivery | Get it May 9 - 13 | Get it as soon as Saturday, May 11 | Get it as soon as Saturday, May 11 | Get it as soon as Saturday, May 11 | Get it as soon as Saturday, May 11 | Get it as soon as Saturday, May 11 |
| Customer Ratings | ||||||
| Easy to install | ||||||
| Easy to use | ||||||
| Adhesion | ||||||
| Value for money | ||||||
| Heat resistance | ||||||
| Sold By | R/A Hoerr Incorporated | TFRJNFG | Amazon.com | Amazon.com | TFRJNFG | Ucreative |
Reviews with images
Easy to work with
Unsure of total material required, I cut equal strips after basic measuring of diameter and had some overlap. I don’t know the math on single layer performance versus multiples, assuming the quoted performance is based on one layer and safe to assume multiples increase effect lol. This application is for two intakes that are directly above turbos and headers subjecting the intakes to heat soak. Looking forward to reduced temps inline before intercooling. Thankfully I have the ability to display parameters in real time on this vehicle and it is lower than without. However ambients are also much lower than usual too, but the margins have decreased.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on January 21, 2015
I installed the tape by measuring the diameter (3" in my case) and added roughly 1/8" just for complete coverage. It took a while, but I flipped every strip over and also sprayed the 3M adhesive to the back side. After a few hrs of operation, one with higher engine temps the tape performed as expected, was cool to the touch shortly after shutting down the vehicle and showed zero signs of sagging or peeling up. A few drives and days later and same results. Even sprayed it off with water to clean the road debris off.
One last thing worth mentioning, any sort of radius is going to be difficult to wrap. For this I cut the wrap in half and used shorter 1.5"-2" strips to get 180 degrees of coverage properly. If you are wrapping an intake or intercooler piping and your filter or coupler is rated for same diameter, I recommend leaving the gold tape back just enough for your filter to clamp on. In my case I am running a K&N 3" cone and it was too snug to fit over the gold wrap. After a few frustrating attempts I eventually ended up scrapping one 3" section as it had gotten too beat up during attempts to install my filter to consider presentable.
See attached picture of my engine for reference.
Size: 2" x 15' RollVerified Purchase
Great tape, add some spray adhesive to be safe
Reviewed in the United States on January 21, 2015
Absolutely gorgeous, definitely keeps my intake temps down. As per the heed of other peoples reviews around the internet with premature peeling of the tape, I first sprayed the item I was wrapping with 3M super 77 spray adhesive. In my case I wrapped a turbo inlet I built as it is located across my turbos hot side. Before wrapping the intake, my first few drives with the car showed heat soak after full strong pulls, especially when it is hotter outside.Reviewed in the United States on January 21, 2015
I installed the tape by measuring the diameter (3" in my case) and added roughly 1/8" just for complete coverage. It took a while, but I flipped every strip over and also sprayed the 3M adhesive to the back side. After a few hrs of operation, one with higher engine temps the tape performed as expected, was cool to the touch shortly after shutting down the vehicle and showed zero signs of sagging or peeling up. A few drives and days later and same results. Even sprayed it off with water to clean the road debris off.
One last thing worth mentioning, any sort of radius is going to be difficult to wrap. For this I cut the wrap in half and used shorter 1.5"-2" strips to get 180 degrees of coverage properly. If you are wrapping an intake or intercooler piping and your filter or coupler is rated for same diameter, I recommend leaving the gold tape back just enough for your filter to clamp on. In my case I am running a K&N 3" cone and it was too snug to fit over the gold wrap. After a few frustrating attempts I eventually ended up scrapping one 3" section as it had gotten too beat up during attempts to install my filter to consider presentable.
See attached picture of my engine for reference.
Images in this review
Reviewed in the United States on July 19, 2023
Size: 12" x 24" SheetVerified Purchase
this product is one of the safest ways to protect your engine against the high heat that is generated while in stop and go traffic anyplace, this product deflects the heat surrounding intake going into your engine and all that know how important it is to keep your engine running as cool as possible in the insane amount of heat that each day is generating almost to the point of being out of control. i recommend design engineering 010392 reflect-a-gold high temperature heat reflective adhesive backing sheet it just might save you in the long run.
Images in this review
Reviewed in the United States on June 20, 2023
used in this case to limit heat exposure of intake assembly from the new headers going in.
Size: 2" x 15' RollVerified Purchase
worth the money; quality adhesive and foil thickness
Reviewed in the United States on June 20, 2023
as a professional design engineer: this product is pricey for a reason. the adhesive's hold and temperature rating are very good and the foil thickness is enough to protect without being difficult to form. it's easy to work with and isn't fussy, even in places like compound corners.Reviewed in the United States on June 20, 2023
used in this case to limit heat exposure of intake assembly from the new headers going in.
Images in this review
Top reviews from other countries
TJ Marshall
Wrong size listed
Reviewed in Canada on April 23, 2023Size: 12" x 24" Sheet (Smaller Packaging)Verified Purchase
TJ Marshall
Reviewed in Canada on April 23, 2023
Images in this review
Paul Canada
Works great, great adhesion and lasted for over a year with temperatures up to around 250C (480F)
Reviewed in Canada on November 25, 2020Size: 2" x 15' RollVerified Purchase
Paul Canada
Reviewed in Canada on November 25, 2020
A bit pricey, but it's the only option for a task like this.
Images in this review
Mhellcat
Quality stuff!!!
Reviewed in the United Kingdom on May 2, 2019Size: 2" x 15' RollVerified Purchase
C. McKernan
A little pricey but worth it for the quality
Reviewed in Canada on May 27, 2017Size: 2" x 30' RollVerified Purchase
Amazon Customer
Five Stars
Reviewed in the United Kingdom on March 29, 2016Size: 1.5" x 30' RollVerified Purchase
