Another satisfied WRX/STi driver. I installed these about 6 months and 7,000 miles ago on a 2016 WRX and have since had great results with these fog lights. They've been problem-free, even on a 700 mile drive down the East Coast through a very large and heavy rainstorm. The unique yellow bulb color helps to illuminate poor visibility conditions, such as heavy rain, snow, or fog. It is a great improvement over the stock halogen fog light bulbs. The bright, striking color ensures that other cars will see you during even the lowest visibility conditions. The color is more yellow than the product pictures suggest. It's closer to a highlighter yellow (see attached picture).
Installation on a WRX or STi is simple. Rather than going through the trim in the wheel well, I found it was easiest to remove two or three clips on the splash guard just below the fog light/turn signal housing. This gives you enough room to reach up into the housing and remove the bulb. Pop out the old bulb, attach the new bulb, and you're done. Before you reassemble everything, turn on the fog lights to make sure the polarity is correct. If the bulb doesn't initially light up, reverse the pins (instructions explain this in detail) and that will fix it.
| Manufacturer | Nokya |
|---|---|
| Brand | Nokya |
| Item model number | H11/H9/H8 |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | NOK9618 |
| Position | Front |
| Mirror Lighting Type | automotive-exterior-fog-light-bulbs |
| Voltage | 12 Volts |
