1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Suggestions/Advice on putting in a rear electronic differential

Discussion in '1st Gen. Tacomas (1995-2004)' started by 99tacomaSR5, Mar 14, 2015.

  1. Mar 14, 2015 at 9:35 PM
    #1
    99tacomaSR5

    99tacomaSR5 [OP] Member

    Joined:
    Mar 10, 2015
    Member:
    #150590
    Messages:
    7
    Gender:
    Male
    Louisiana
    Vehicle:
    99 Tacoma SR5 4X4
    3" Skyjacker lift, SPC upper control arms, 3" Skyjacker rear leaf springs
    Thinking about putting in a rear electronic locking differential. Don't know much about them looking for advice or suggestions please
     
  2. Mar 15, 2015 at 9:59 AM
    #2
    knuckleduster271

    knuckleduster271 Well-Known Member

    Joined:
    May 17, 2014
    Member:
    #129994
    Messages:
    439
    Gender:
    Male
    First Name:
    Baron Longrod Von Hug€nschlong
    ohio
    Vehicle:
    98 sr5 xtra cab
    881's, 5100's, soft 8's, elocker, matrix seats, smittybilt xrc8.
    If you want to do it the easy way look up 12voltguy.com for a plug and play harness.
    Otherwise its a pretty straight forward swap.
     
  3. Mar 15, 2015 at 12:58 PM
    #3
    99tacomaSR5

    99tacomaSR5 [OP] Member

    Joined:
    Mar 10, 2015
    Member:
    #150590
    Messages:
    7
    Gender:
    Male
    Louisiana
    Vehicle:
    99 Tacoma SR5 4X4
    3" Skyjacker lift, SPC upper control arms, 3" Skyjacker rear leaf springs
    Thank you
     
  4. Mar 16, 2015 at 11:41 AM
    #4
    Lumpskie

    Lumpskie Independent Thinker

    Joined:
    Apr 20, 2013
    Member:
    #102450
    Messages:
    1,978
    Gender:
    Male
    New Hampshire
    Vehicle:
    '96, 4x4, v6, manual hub
    Toytec 16" coilovers with Tundra Bilstein 5100s, Light Racing UCAs, Alcan Leafs with Orbit Eyes, 12" Bilstein 7100 short Bodies, ARB rear locker, 33x12.5 Duratracs, CBI sliders, Bushwacker fender flares, self made front bumper, M8000, Vision X 6.7" Hi/Lo Beam HIDs, full skids, Inchworm dual case setup - 15º clocking
    Just in case...

    If you're talking about the TRD locking diff, it won't fit with the standard non-locking axle. You'll need to swap the whole axle, with the locking diff in it.
     
  5. Mar 16, 2015 at 7:14 PM
    #5
    knuckleduster271

    knuckleduster271 Well-Known Member

    Joined:
    May 17, 2014
    Member:
    #129994
    Messages:
    439
    Gender:
    Male
    First Name:
    Baron Longrod Von Hug€nschlong
    ohio
    Vehicle:
    98 sr5 xtra cab
    881's, 5100's, soft 8's, elocker, matrix seats, smittybilt xrc8.
    +1
    You have to swap the whole axle assembly.
     

Products Discussed in

To Top