Uniball care?

I just called Camburg to check on their uniball maintenance. Besides using triflow to lube them, I wanted to know what to use to clean them. The gal on the phone recommended I use WD-40 to clean them, but I remember specifically a tech before had told me not to ever use WD-40 on the unballs and to use only triflow.

So what are you guys using to clean the uniballs?

I also asked about cleaning up the bushing grease, that stuff is sticky! I've tried a rag with acetone to get it off and nothing will remove it.

 

wipe away the dirt n dust and gunk. and lube with some teflon lube.

 

That's what I've been doing, but I wanted to see if I could clean them a bit better than with a rag.