How to wire switch to LED bar?

Hey guys, I'm not very good at electrical stuff and don't want anything to go wrong so I figured I'd ask a group of in my eyes experts haha! Well I installed my 30inch led to the crash guard behind the lower bumper, it came with a relay, fuse, switch and all but I didn't like the stock switch so I bought a replacement for the blanks on my TRD sport 2014.
The main thing I need help and clarification is how to wire the new switch to the wires from my led bar. The new switch came with 1black, 2red, and a green wire, the instructions express black = ground, red1 goes to light indicator or something, red2 is the light, and the green I forget. Sorry I'm not home with the packaging.
The light wiring from my led had red,black, and yellow so I'm not sure what goes where haha. Any help would be nice! I'll add some pictures to show what all I have.
Thanks you!!
Update: couldn't figure how to put a lot of pictures haha sorry I can't help more

 

I would remove the switch and move it into the little trash bin under the dash. I wired my rigids up and just stuck it in the little bin.

 

I kinda like how clean it looks there just don't now how to wire it. Right now it's just in there with no wiring