Selling trd 7th injector. Need advice on how to remove it

Hi planning on selling my trd 7th injector. It came with my truck want to take it off and sell it. Just need advice on how to remove it. Will appreciate the help thanks!

 

Hopefully you are replacing it with a URD unit. I don't recommend running the supercharger with out it.

You can google the install directions and reverse them like I did.

Basically you take the glove box out and unplug the TRD computer and plug the plugs into the Stock ECM. They are multiple plugs but they only fit in one whole so no worry to mess it up.

Undo the clamp and tape from the wiring loom cover under the hood. Facing the truck it will be on the back, left firewall. The cable to control the injector runs thru there. You then will have to remove the fuel supply line off of the back of the fuel rail and reinstall the banjo bolt that connects fuel line to the upper injector block in the fuel rail. This banjo bolt will only have one hole in it.

The remove the injector and block and replace with a block off plate.

Might have an upgraded fuel pump in the tank as well. I would just leave that there. Won't hurt anything.

 

Where can I get the banjo bolt? What size is it ? Also where do I get the block plate?? Thanks!

 

The banjo bolt you need is the one that connects the fuel line to the 7th injector fuel block. When you install the kit you reuse the stock one. You will have to google the block off plate. Mine was in a bag of parts that came with the supercharger. You might be able to find Ne on here. Would be super hard to make one.

 

are you planning on selling after you get it off??

 

I have a TRD kit minus the injector and injector block. (Those two went on the URD kit).