1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

6in fabtech

Discussion in 'Suspension' started by JMuFF808, Apr 28, 2015.

  1. Apr 28, 2015 at 9:08 PM
    #1
    JMuFF808

    JMuFF808 [OP] Member

    Joined:
    Feb 27, 2013
    Member:
    #98648
    Messages:
    23
    Gender:
    Male
    Kauai
    Vehicle:
    2012 4wd TRD off
    So I'm buying a 6in fabtech basic system with performance shocks and I have a 17in rim with a 14 offset and 5.25 back spacing well these work or will the rim rub the caliper?
     
  2. Apr 28, 2015 at 9:33 PM
    #2
    TacoMAUI95

    TacoMAUI95 Well-Known Member

    Joined:
    Nov 11, 2014
    Member:
    #142162
    Messages:
    468
    Gender:
    Male
    Maui,HI
    Vehicle:
    17DCLB TRDOR MGM. Replaced 2014 DCSB TRDOR
    Nothing yet. Old truck had the works.
    that is like super close backspacing. I have 17inch Method NVs not sure offset but backspacing is 4.75 and the caliper is CLOSE! like closer than my finger is wide. You go an entire half inch you might have problems.
     

Products Discussed in

To Top