1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Help!! need PID & equation for my SUV

Discussion in '2nd Gen. Tacomas (2005-2015)' started by creavation, May 21, 2015.

  1. May 21, 2015 at 6:19 AM
    #1
    creavation

    creavation [OP] New Member

    Joined:
    May 20, 2015
    Member:
    #155656
    Messages:
    3
    Gender:
    Male
    First Name:
    Juan
    Hello,

    Very sorry, this is not TACOMA truck but for Subaru Forester 2015
    I have heard there are a lot of experts here who know very well about PID & equation setup for Torque Pro, even RAV4 members brings lots of info from Tacoma forum here.

    I have tried to figure out right PID and equation (only for Transmission Fluid Temperature) for my 2015 Subaru Forester2.5i base model. I already figured out Toyota RAV42014 PID and equation from Xgauge Code, but not for Subaru[​IMG] because of weird TXD numbers ~A800000056 which is not even valid at Torque Pro.

    Would anybody please help me to find PID and equation for Torque PRO?

    I have already contacted developer of Activeobd for Subaru (I guess Russian software) and he said "I don't know" - I tried to use Activepro app but it has bad connection issues and numbers are quite off compared with Torque pro. Also, options are very limited.

    One guy uploaded this at Subaru forum and he verified both are working and said that number 2) -CVTF could be used instead of 1) -ATF

    Below are X gauge codes that work for ScangaugeIIfor 2015 Subaru Forester XTmodel and 2014 Subaru Legacy--> he said these should work[​IMG] for all newer Subaru model across the board

    1) Gauge: Transmission[​IMG] Temperature
    TXD: 07E1A800000056
    RXF: 04E800000000
    RXD: 2008
    MTH (Fahrenheit): 00090005FFC6
    NAM: ATF

    2) Gauge: CVT Temperature
    TXD: 0360
    RXF: 0103 02678 0000
    RXD: 2008
    MTH (Fahrenheit): 00090005FFC6
    NAM: TT[​IMG]


    With RXD and MTH, I kind of figured out equation but not sure if it is correct
    ((A*(9/5-58)/10)

    If I buy ScanguageII and use above code, then all good but I can't keep hooking it up to obdII port in my car[​IMG] since I have to use Allstate drivewise dongle.

    Please, help[​IMG] me!!

    I really want to read transmission fluid temperature using Torque Pro!! Thank you in advance!

    upload_2015-5-21_9-15-20.jpg
     
    This site contains affiliate links for which the site may be compensated.
    #1

Products Discussed in

To Top