Ome 884 with bilstein 5100 set at zero

My plan was to put this set up on and level the truck out. I have a dcsb Ted sport and was just curious of your guys measurements after you installed the coils and shocks or just the coils. I am currently setting a little higher in the front but if they end up settling like everyone says they do I will no longer be level. What is your guys measurements so I have something to compare to? Any info would be greatly appreciated! Thanks for the help.

 

If you have the trim pack on yours was it still a little lower on the driver side? Mine is a 1/2 inch shorter still on the driver side. Or are there different trim packs? I just went with the one that wheelers sent with the springs.

 

Also see your build says you have the wheelers progreive aal, did that give you any lift or did you put that on for more strength? Just curious because I'm not sure if you went with the level look or the factory rack look. Is that all you have on the front is the 884s with trim pack or did you add the lift blocks on top of that? Sorry for all of the questions.

 

I'm at 22" hub to fender.

 

Thanks for the help man!