1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Help: driver side headlight not working

Discussion in '2nd Gen. Tacomas (2005-2015)' started by kenny216, Jun 11, 2015.

  1. Jun 11, 2015 at 6:08 PM
    #1
    kenny216

    kenny216 [OP] Well-Known Member

    Joined:
    Oct 12, 2012
    Member:
    #88862
    Messages:
    136
    Gender:
    Male
    First Name:
    Kenny
    Phoenix, AZ
    Vehicle:
    11 debadged Prerunner
    285/75/16 Bfg All Terrains, add a leaf in the rear, bilstein 5100's all the way around and someone built different upper arms before i bought it.
    So I have had HID'S in my 2011 for quite a while now. A few weeks back the driver side stopped workin. I figured it was just the bulb, but I only have 1.5v coming out of the harness. Any ideas?
     
  2. Jun 11, 2015 at 6:16 PM
    #2
    Justus

    Justus fucks not given

    Joined:
    Jan 4, 2013
    Member:
    #94417
    Messages:
    9,230
    Gender:
    Male
    First Name:
    Nabisco the kid
    In ur toolbox
    Vehicle:
    not so low, not so slow 2006 6 lug
    stockish
    bad ballast
     
  3. Jun 11, 2015 at 6:18 PM
    #3
    DR007

    DR007 Well-Known Member

    Joined:
    Nov 12, 2012
    Member:
    #90963
    Messages:
    661
    Gender:
    Male
    First Name:
    Dylan
    Port Barre, LA
    Vehicle:
    '06 DCSB PreRunner
    MagnaFlow exhaust, K&N cold air intake, MB TKO wheels with 265/75/r16 Hankook Dynapro ATM, Blue Center shift LED color change, Map Lights with Dome, LED Map and Dome lights, Cluster Light Change, DTRL, Parking Light as Blinker, Blue A/C Control lights, Blue Clock, Bed Lights, Debadged tailgate, painted all exterior plastic trim, 6LZ Lightbars in grille, OTRATTW switches, Fog Light in Reverse light Mod, LED Blinkers all around, Projector Fog Lights, 15" blitzpro light bar, added hidden cig lighter port, custom plate front bumper, OME complete lift with 885 front coils, Ultraguage, CB radio 3' whips, 12v bed lighter port, Center Console Lights, AllProOffroad Sliders, 50" roof led light bar, 2 BlitzPro 6LZ Reverse Lights
    x2 swap around the good ballast to the other side and see if it works. Then just get a new ballast.
     
  4. Jun 11, 2015 at 6:25 PM
    #4
    kenny216

    kenny216 [OP] Well-Known Member

    Joined:
    Oct 12, 2012
    Member:
    #88862
    Messages:
    136
    Gender:
    Male
    First Name:
    Kenny
    Phoenix, AZ
    Vehicle:
    11 debadged Prerunner
    285/75/16 Bfg All Terrains, add a leaf in the rear, bilstein 5100's all the way around and someone built different upper arms before i bought it.
    It isnt the ballast's. I'm actually switching to led bulbs. I habe 1.5v coming out of the harness from the truck
     
  5. Jun 11, 2015 at 6:27 PM
    #5
    DR007

    DR007 Well-Known Member

    Joined:
    Nov 12, 2012
    Member:
    #90963
    Messages:
    661
    Gender:
    Male
    First Name:
    Dylan
    Port Barre, LA
    Vehicle:
    '06 DCSB PreRunner
    MagnaFlow exhaust, K&N cold air intake, MB TKO wheels with 265/75/r16 Hankook Dynapro ATM, Blue Center shift LED color change, Map Lights with Dome, LED Map and Dome lights, Cluster Light Change, DTRL, Parking Light as Blinker, Blue A/C Control lights, Blue Clock, Bed Lights, Debadged tailgate, painted all exterior plastic trim, 6LZ Lightbars in grille, OTRATTW switches, Fog Light in Reverse light Mod, LED Blinkers all around, Projector Fog Lights, 15" blitzpro light bar, added hidden cig lighter port, custom plate front bumper, OME complete lift with 885 front coils, Ultraguage, CB radio 3' whips, 12v bed lighter port, Center Console Lights, AllProOffroad Sliders, 50" roof led light bar, 2 BlitzPro 6LZ Reverse Lights
    So if you're ballast is good and bulb is good but you only have 1.5v coming from the harness what makes you think switching to LED bulbs will fix the problem? Just wondering.
     
  6. Jun 11, 2015 at 6:32 PM
    #6
    kenny216

    kenny216 [OP] Well-Known Member

    Joined:
    Oct 12, 2012
    Member:
    #88862
    Messages:
    136
    Gender:
    Male
    First Name:
    Kenny
    Phoenix, AZ
    Vehicle:
    11 debadged Prerunner
    285/75/16 Bfg All Terrains, add a leaf in the rear, bilstein 5100's all the way around and someone built different upper arms before i bought it.
    i wasnt aware of the situation until after i tried changing the bulbs
     

Products Discussed in

To Top