1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Bucket Seat Backs Interchangeable

Discussion in '1st Gen. Tacomas (1995-2004)' started by blstanle, Jun 11, 2015.

  1. Jun 11, 2015 at 4:32 PM
    #1
    blstanle

    blstanle [OP] New Member

    Joined:
    Jun 11, 2015
    Member:
    #157226
    Messages:
    2
    Gender:
    Male
    I just purchased a 2003 DC and the drivers seat back is worn and has some tears along outside edge from entering and exiting. I have found some used seats but the drivers seat is always pretty worn while the passenger side is very good. I am wondering if it is possible to swap just the seat back on the drivers seat with one from a passenger side seat? Any thoughts/help would be appreciated. Thanks
     
  2. Jun 11, 2015 at 4:46 PM
    #2
    KenLyns

    KenLyns 8.75" Third Member

    Joined:
    May 23, 2010
    Member:
    #37674
    Messages:
    29,363
    Gender:
    Male
    Belly of the Beast
    Vehicle:
    4x4 TRD Off-Road Full-Auto
    LED Headlights, Volant CAI, 32" Duratracs
  3. Jun 11, 2015 at 4:51 PM
    #3
    TashcomerTexas

    TashcomerTexas My truck is a whiner

    Joined:
    Apr 16, 2014
    Member:
    #127853
    Messages:
    10,350
    Vehicle:
    2003 TRD DC Supracharged
    Put some leather in that sucker
     
  4. Jun 11, 2015 at 7:05 PM
    #4
    keakar

    keakar Well-Known Member

    Joined:
    Oct 2, 2014
    Member:
    #139537
    Messages:
    5,258
    Gender:
    Male
    First Name:
    karl
    louisiana
    Vehicle:
    2006 4runner sport 4.7L V8 (white)
    used to have - 99 2.4L I4 5 lug & 04 prerunner v6
    yes the seat backs are swappable and the bottoms are too but the vinyl side for the door side and cloth for the hump side may be backwards, but only you will know its not supposed to be that way.

    pull the cushion up a few inches and there are two 12mm bolts on each side for the backs, for the bottoms, remove the plastic covers to see the two 12mm bolts holding it on
     
    Last edited: Jun 11, 2015
  5. Jun 11, 2015 at 8:02 PM
    #5
    blstanle

    blstanle [OP] New Member

    Joined:
    Jun 11, 2015
    Member:
    #157226
    Messages:
    2
    Gender:
    Male
    Perfect - thank you very much
     

Products Discussed in

To Top