2015 shark fin antenna for after market head unit/XM

Anyone with a 2015 been able to find an adapter to re-use the shark fin antenna when changing out there entune radio? Im told by one of the manufactures of the previous interface cables that Toyota changed the connector in 2015 model.

 

Here ya go get one of these. Works flawlessly.

http://www.tss-radio.com/lexus-is-and-ls-shark-fin-antenna-adapter-sfa12f.html

 

i looked at this one made by VAIS i believe. They are the ones that told me 2015 was different and they didnt have a cable yet. Did you get this to work on 2015 ?

 

It worked just fine

 

thanks will give it a try

 

Can you confirm this interfaces right at the antenna (in headlinder) and the xm tuner ? Thanks

 

All I know is my installer hooked it all up with zero issues. It was plug and play

 

thanks

 

i see it plugs into the harness at the left kick panel and the other end into the xm tuner..

 

You are correct

 

i have received the sfa12f cable. upon investigation it definitely will not fit in kick panel harness receptacle. I am now thinking it must plug onto cable that was plugging into back of entune.

 

If you just need to go from the blue antenna plug in the factory harness to an aftermarket XM receiver, you might be able to take the adapter out of the factory headunit and use that. That's what I did, but I'm not sure if the new Entunes are the same.

 

Anyone figure out the antenna connection?

 

i could never find the right cable to use. My installer ended up cutting and soldering the sat antenna cable (behind radio) to the xm radio unit. Works perfect