303Shocks

​

COTW,

303Shocks is an authorized ICON service center!!!

I'm offering up my services for TW members that have shocks that need rebuilt or just want to change the valving for a ride that matches their driving style.

I can rebuild any shocks that can take a nitrogen charge. IE: King, Icon, ADS, SAW, Fox, and even FOA's.

Any questions feel free to PM me


Thanks,

Tim

 

@Squeaky Penguin

 

I already recharged my shocks, but meet Tim a few days ago. Will be heading his way when I have to work on them in the future.

 

Saving for later....

 

Best of luck in the shock rebuilding business...BTW, would you do motorcycle shocks too?

Howard

 

I haven't done many but it's not much different than a off road shock.

 

Oh good, I will post your contact info on some of my motorcycle forums and you receiving dock might be overflowing with Works, Ohlins, Hagans, Koni and every other off brand ones we are using...

Howard

 

Oh wow. You and I are going to become best friends. Do you happen to know JD? Anyways I'm building a long travel set up right now and I'm going to need to recharge my triple bypasses after I cycle the rear. I'll keep in touch and your not that far from me either. (Sub)

 

JD that works were?

What bypasses do you have? @SilverGhost

 

JD, long travel taco in AZ. He's one of the guys that's been helping me with info on setting up the long travel. Anyways. I'm going to get 16" fox triple bypasses. I don't have them yet. Monies is going into Fab right now. I'll pick them up closer to the end of the yr.

 

Gotcha,

Let me know if you have any questions. I can guide you in the right direction with LT and shock questions.

I have some Kuster 3.0 bypasses that I might sell, I'm still undecided what I want to do with my truck.

 

X2

 

Noob ? I have Icons how can you tell gave much nitrogen pressure is in the front..can you check & fill through the fitting on top of shock?
Thanks

 

200 psi is the normal charge but can range from 150-300

 

can the pressure be checked and filled with the fitting at the top of the coilover? or does the coilover need to be removed? Just curious mine are pretty new...just wonderng what that fitting is for. thanks

 

If there is room to get my gauge in I can check the pressure on the truck. Your icons probably take a nitrogen needle to fill or charge them, not a normal Schrader valve.

 

Thanks for your replies Tim. I might have to look you up soon

 

Got @dtacow's 2nd gen Icons on the rebuild table this am.

 

^Ha! Just saw this. Thanks!

 

Might have to take advantage of this.. Just sucks you're an hour and half from me. PM'ing you