prerunner lift to fit 24x16s

Would I be able to combine the maxtrac 6.5 spindles with the spacer and 3 inch coil lift for 9.5 inches of lift?

Also would the 6.5 spindle lift strong enough for 24x16s? This truck will never go off road I have a 4x4 for that.

Also if im dumb I'll just run 22x14s but I really want the 16s

 

The 6.5 kit uses a 2.5" coil spacer on top of 4" spindles. The highest you can go is 7" in total. As far as strength these spindles are beefy. That's not the issue. You will put more strain on your hubs and what not. With that said you should be fine for a street queen. I've seen 16 wides on a maxtrac 6.5" kit.

EDIT: welcome to tacomaworld

 

Thanks man I love this forum.

So I'm basically limited to 7 inches of lift?

 

Yes. Unless you get this one brand of drop bracket with coilovers that will give you 8. But stick with maxtracs. 7" is good. Now with 16 wides you will have to chop or even relocate the cab mount so you don't rub with the slightest turn of the wheel.