Can we get hub to fender measurements in one location?

I have searched and found different threads with measurements. But when I look for the thread again, I can't find it.

I am interested in measurements of billies with 884, 885 etc, with and without winch and mount.
My current center of hub to fender measurements are as follows:
Front 21.125"
Rear 23.75"

I have billies with stock springs and a driver side lean spacer set at 1.75" in front
2" AAL in the rear

I want to get to about 22-22.5" up front.

If everyone will post their measurements and setup, I will put them in a spreadsheet and distribute to those interested.

 

Oh, and a side shot of your rig would be a good reference to add and include in the file.